Friday, November 19, 2021

The First Shots – Early-WW2 Bolt Action Battle Report

A year ago I finally finished painting my early war Polish army and was looking for a suitable scenario to deploy them on the table top. I hit upon Scenario 1 from the Bolt Action campaign book ‘Germany Strikes!’ which is about the defence of the Polish Post Office in Danzig. There were a few special units required, such as Steyr ADGZ armoured cars and several German light and medium artillery pieces. Doing some research into the actual battle, I was inspired to not only paint up the additional units, but to build the center piece of the battle, the massive Polish Post Office itself. (Use the tag ‘Polish Post Office Danzig’ to find the related posts on our blog.)

Last night Conscript Dallas hosted the game in the ‘Churchill Bunker’ with five other conscripts to command the Polish and German Forces. The Poles are superior in quality to the majority of German units, but they are significantly outnumbered and outgunned.  With the hard cover of the post office building, and the inexperience of the attackers, it would still be a difficult task for the Germans to capture the building.




The Polish Forces consisted of 2nd Lieutenant Konrad Guderski, six rifle sections of four men, two light machine gun teams, and two grenade launcher teams. Guderski is a veteran with a +2 morale modifier, and the rest of his men are regulars. The Poles have a ‘No Where To Run’ special rule which allows them to re-roll failed morale tests. In addition, Guderski also has a ‘They Shall Not Pass’ special rule where he can set off a massive grenade charge which causes every model  within  a radius of 3” of him (including himself)  to take a hit with a +1 Penetration value.

The German Forces consisted of a mix of SS-Heimwehr Danzig, SA, and Ordnungspolizei, supported by two armoured cars, a medium machine gun team, two light howitzers, a medium howitzer and a small section of assault pioneers with a flamethrower and satchel charges. They would come on in three waves as follows:

1st Wave: 1 x 2nd Lieutenant, 2 x Ordnungspolizei Sections, 1 x MMG Team, 1 x Light Howitzer, 1 x Steyr armoured car, Deploy on the table anywhere outside 12” from the Post Office.

2nd Wave: 1 x 2nd Lieutenant, 3 x SS-Heimwehr Danzig Sections, 1 x Assault Pioneer (Sapper) Team, 1 x Medium Howitzer. Enter on Turn 3 from any board edge

3rd Wave: 1 x Sturmabteilung Section, 1 x Light Howitzer, 1 x Steyr armoured car.  Enter on Turn 4 from any board edge.

While the officers, support weapons, armoured cars, and sappers are regulars, the rest are all inexperienced with the SS-Heimwehr also rated as Green (on first casualty roll D6 - 1: extra D6 pins & go Down, 2-4: no effect, 5-6: upgrade to Regular), and the SA rated as Shirkers (always take order test, count pins as double).

The Polish defenders were trying to hold more rooms in the post office building than the Germans at the end of the game, which would last a minimum of 5 turns. At the end of that turn, there is a chance of a sixth turn, with a chance of a seventh.

Rather than have the Poles inside the building model, they were deployed on a grid off board designating the six rooms on each floor. Not knowing where the Germans were coming from, the Polish players deployed in ‘all round defence’

The Germans players deployed their first wave near the eastern end of the post office building, and began bringing artillery and machine gun fire on that part of the building. Initially the German artillery had little success, and the Polish defenders were able to take out the Germans’ MMG team. However, with the arrival of the second wave, things started to swing over to the Germans’ side. They were able to score a devastating hit with the medium howitzer that took out a rifle section, a grenade launcher team, and a LMG team.  Meanwhile two sections of SS-Heimwehr tried charging the front entrance of the post office, and the Assault Pioneers planted a satchel charge against the west end of the building. 



 

Although Polish casualties were mounting, the defenders successfully repelled some of the Germans rushing the front entrance. One Heimwehr section got upgraded to Regulars on receiving their first casualty, but later rolled a ‘FUBAR’ on their command check two turns in a row and ran off the game board. However, a section of Ordnungspolizei and an officer were able to get inside.  At that point the Polish commander set off a bag of grenades in the midst of the Germans that wiped out the squad, but due to the vagaries of the game rules, the Polish and German officers both managed to survive the blast.




Despite this brief success, the Germans gradually managed to gain the upper hand. Polish squads were forced to retreat to the south side of the building to avoid the German artillery fire, while the Steyr armoured cars started to drive around to that side to bring them under machine gun fire. Meanwhile the satchel charge blew a hole in the west wall allowing more German squads to enter the building. 




 

The game ran to the maximum seven turns with the Germans finally controlling more rooms than the Poles at the very end. This played out much as the historical battle. At the end of the game, I gave a brief summary of the fate of the Polish defenders. The players enjoyed the game, which hung in the balance until the final turn.  It was good to finally see all the newly painted units on the table top, as well as the model of the post office building. A few of the conscripts have suggested that the scenario would do well as a participation game at a wargames convention.  Until next time!

 

Wednesday, November 17, 2021

SW Legion - Cassian Andor and K-2SO

Cassian Andor and K-2SO - figures from Fantasy Flight Games "Star Wars Legion" range.

Well, there was a slight diversion there, but it did not take long to squeeze another "Star Wars Legion" bit on my painting desk. Here we have Cassian Andor and K-2SO, characters from the excellent "Rogue One" film. These are plastic figures from Fantasy Flight Games' "Star Wars Legion" game. 

"Why can't I have a blaster?"

The Disney sequels for "Star Wars" are awful. I don't mean to dwell on that here - there are many other (better-written) sources for that sort of content online. But I found first one was so vomit-inducing that it caused me to ignore anything "Star Wars" that emerged from the sh*t pit of the Mouse Empire. This stubborn attitude, in turn, caused me to ignore "Rogue One" when it came out in theatres. Wow was that dumb on my part! Years passed, and I finally watched "Rogue One" on TV, and loved the film. So when I finally tilted over into collecting and painting "Star Wars Legion", I was pleased to see a number of characters from the film were already featured in the game's miniature range.  

Very nice sculpts from FFG.

There are different options to equip both Cassian Andor (either pistol or rifle) and K-2SO (either unarmed, or carrying Jinn's blaster). I find this latter option to be nicely on-the-nose, given K-2's complaint about not having a weapon during the movie. I nonetheless decided to leave K-2 unarmed, with the idea that the figure could represent an actual Imperial Security droid, or even K-2 sneaking in as part of a Rebel op. Plus I just like to imagine K-2 complaining to Cassian about not having a weapon.

Ready for deployment on a gaming table...

While we all know how things end for the Rogue One team in that movie, the idea of gaming battles featuring the characters and troops from the film is certainly a motivating one - not only the fateful battle on Scarif, but other "what-if" operations as well. I know a lot of other "Star Wars Legion" players are motivated by the same notions, so my approach is hardly original, but nonetheless it will be fun to paint them up. I'm particularly pleased to have K-2, such a great and fun character. More of the characters from the "Rogue One" film are available from various 3D printing aficionados out there (thanks to Dave V for pointing me in the right direction), so watch for more "Rogue One" content to appear in this space as the winter arrives.

That's all for now - thanks for reading, and happy painting! 

Monday, November 15, 2021

Franco-Prussian War - 28mm French Artillery

28mm French 4-pounder guns & crew for the Franco-Prussian War of 1870. Metal models and miniatures from Perry.

After a nice long run of "Star Wars Legion", my brushes depart suddenly to return to a more familiar historical setting - the Franco-Prussian War. These are 28mm metal guns and figures from Perry Miniatures' new line for the Franco-Prussian War. These are 4-pounder rifled muzzle-loading artillery pieces, the mainstay of the French artillery during the Franco-Prussian War of 1870.

"Fire on those Prussians!"

It was great to see that artillery pieces and crews have been among the early releases for the Perry's new 28mm Franco-Prussian War figure range. Proper guns and crews from 1870 are otherwise lacking - even in the relatively complete Wargames Foundry range (also sculpted by the Perrys) does not have proper 4-pound rifled guns for the French side. So when these appeared as new releases from Perry Miniatures earlier this fall, I ordered a pair of guns right away. 

Spoked wheels are always terrible to work with - and these were particularly awful. Check out the tags that needed trimming...

Painting artillery is always a drag - the spoked wheels are generally a nightmare to work with, and these were no exception. While I won't pretend these guns were fun to build and paint, they are nonetheless a very welcome addition to my 28mm collection.

I do like the sculpt of the fellow pulling the lanyard...nice and dramatic....

While the guns were a pain in the ass, the French crew were fun to paint up - in general, the French uniforms for this period are just lovely, and I really like working on them.    

Ready for action on the table top, at some unknown time in the future...

The French artillery performed badly during the Franco-Prussian War, but even with whatever negative modifiers and other issues they might be saddled with, a French player will still want to at least try to use their guns on the advancing Prussians. These two pieces, together with the previously painted mitrailleuse can combine to represent the artillery complement of a French infantry division on the tabletop. I also still have the 12-pounder reserve gun, so the French artillery for my 28mm Franco-Prussian War is now in pretty good shape! 

That's all for now - regular "Star Wars Legion" service will resume shortly, I expect. 

Tuesday, November 9, 2021

Star Wars Legion Rebel Troopers and Pathfinders - Hoth Style!

Rebel Troopers
So after having painted two units of Rebel Veterans for my Hoth Rebel Alliance crew, I wanted to introduce some variety with some other models. The great thing about the Rebels is that they're somewhat rag-tag, so some differences in uniform and kit are certainly OK. I've tried to minimize any jarring effects by painting these models in a "Hoth palette" (lots of Corax White, Rakarth Flesh, Zandri Dust, Steel Legion Drab, and XV-88) - the reader can be the judge of how well this worked.

Here's the squad leader with a Rebel rifleman.

Gatling blaster trooper and a dude with a grenade launcher (?) of some kind.

Some diversity introduced into the bunch with a Duros trooper.

Backpacks are similar to those included with the Rebel Veterans, that's good.

Rebel Pathfinders
The other unit I just finished was the Rebel Pathfinders, a very thoughtful birthday present from Conscript Dave (thanks Dave!) I enjoyed painting these guys as well, but there are a couple things to note on this box - most notably that there are only six figures in the unit, rather than the standard seven. You do get a variety of weapons here too - a long sniper rifle as well as a heavy blaster (wielded by the alien Bistan, at right) and another strange blaster in the hands of the alien Pao, at far left. These two guys are from Rogue One, of course. 

These are my favourite models from the set - especially the leader, who looks very Hoth-like with his winter hat and goggles.

The leader also sports an interesting set of body armour which I painted in Mournfang and Skrag Brown. The crouching sniper also is so equipped.

Here's the sniper with Pao and Bistan. I like Bistan and his heavy blaster - he's dressed in some sort of spacesuit which I could have researched, I guess, if I weren't so lazy. Anyway it got painted in Steel Legion Drab mostly. Not a huge fan of Pao as the pose is a bit meh, but another heavy weapon of some kind I suppose.

Well there you go - I reckon the Rebels are all set now with 30-some models ready to fight it out on Hoth. Just waiting for one last squad of snowtroopers from a 3D printing operation (and a special surprise addition) to finish off Blizzard Force, then we'll be ready for a game!

Thursday, November 4, 2021

SW Legion: Father And Son

The most complicated father-son relationship to be found in a galaxy far, far away...figures from Fantasy Flight Games.

More Star Wars Legion? Of course more Star Wars Legion! Here we have the final two figures from the Fantasy' Flight's "Legion" Core Set - Darth Vader and Luke Skywalker. These are plastic 28mm size figures from Fantasy Flight Games. 

Are you choking on something?

I love the pose on Vader...one can instantly imagine the direct "motivation" being provided on the scene...

These characters are pop culture icons - not much I can say about them, other than it's great to have them available for any "Star Wars Legion" games that might happen out here in Northern Ontario.  

Luke, striking a defiant pose...

Trusty blaster on his hip as well, in case the light sabre is not the right tool for the job...but really, when would that be?

The sculpts of these iconic figures are excellent, but they are let down by the crappy bendy plastic that FFG opted to use in the manufacture of the figures. BOTH of the light sabres were quite droopy, and no amount of hot water or other tricks would straighten them out. I did my best to sort things out, but at a certain point, I figured "f*ck it" and just painted them up the best I could. But to be clear, bendy plastic is just the sh*ts when it comes to wargaming miniatures.

Galactic Empire figures from the Star Wars Legion core set.

One other thing you will notice immediately is that there is no OSL-type effect on the Luke and Vader figures. I simply cannot wrap my head around that process, and the odds that I would have managed it even close to properly on these two figures are zero. You can search elsewhere on this blog for figures by Dave and Dallas to see how cool OSL can be when done right...maybe I will try it one day. But for now, plain old colours to represent the light sabres!

Rebel Alliance figures from the Star Wars Legion core set. 

With Vader and Luke finished, I have now managed to complete all of the figures from the Core Set! That is a decent-sized small force for each side of the conflict, already bolstered by Rebel and Imperial Specialists! This will bring a halt to the Star Wars Legion painting run for now, as I move back to some other projects, but I'm sure it won't be too long until more Star Wars figures are under my brush - especially with Curt's next "Analogue Hobbies Painting Challenge" on the horizon. Thanks for reading!

Monday, November 1, 2021

Star Wars Legion: Imperial Scout Bikes

Imperial Scout Troopers on speeder bikes - here comes fun!

November has arrived, and so has MORE painting for "Star Wars Legion"! Here we have two Imperial Scout Troopers on 74-Z speeder bikes. These are 28mm plastic models from Fantasy Flight Games, and came as part of the Imperial forces in the "Star Wars Legion" core box.

Gun that engine, before the rebel scum escape!

Service in the army of the Galactic Empire has a lot of downsides, but it always seemed to be that the poor Scout Troopers seemed to have a particularly difficult time of things. Sure, riding around on those speeder bikes looks like fun, but things always seem to conclude with some manner of terrible mishap - if some Ewok didn't already steal your ride!

I really like the pose on this figure - plus it is easy to imagine him racing straight into something while not paying attention! Such is the fate of Imperial Scout Troopers!

The Scout Troopers do provide some pretty hilarious moments, too - with the discussions between the two Scouts that kicked off the finale of season one for "The Mandalorian" being a particular high point of hilarity and enjoyment!

Racing to battle!

I had been procrastinating on finishing these models...mounted figures of any sort are always a bit of a pain, and these speeder bike models were particularly tricky. You'll see that one fellow doesn't quite line up exactly with the front of his notched base...that is because I failed to realize the tiny plastic stem actually has a specific alignment to fit into the bottom of the bike, and this realization came only AFTER the super glue took hold. I didn't want to risk breaking the model, so I left well enough alone...

One other challenge, of course, getting the white colour right...I have used an acrylic extender to try and squeeze more life out of my "White Scar" paint, and this did not quite work out - the extender make the paint lumpy, and thus you can see in the photos that the white armour on these fellows has a not-very-smooth texture...I can hear Duncan Rhodes right now in a video, extolling the virtues of "two thin coats"...anyway....

Off to their next maneuver!

Zipping around at high speed on the gaming table will be fun - I certainly enjoyed that aspect of things during my first game of "Star Wars Legion". We knew the Scout Troopers would meet some manner of terrible end, their bikes crashing into something and blowing up - and we were not disappointed! But it is all good fun. These two will surely do their bit to restore order to the galaxy as they maneuver in support of the Imperial Forces on the gaming table in the future. 

Have to share a big "thank you" to Dallas - I really didn't have an idea of the Scout Trooper uniform beyond a very general notion of "white, you know, with black too". Dallas shared some great pictures, which made the painting process much easier.

That's all for now - but more "Legion" painting work should be along any day now...thanks for reading!