Challenge Submission #16 - Soviet Infantry in Winter Uniforms

 

 

Here is another contingent of defenders of Mother Russia that was completed for the Painting Challenge, specifically 42 Soviet Winter Infantry from the Warlord Games boxed set of the same name. The set consists of five identical sprues of eight figures, plus three weapons sprues, enough to build 40 miniatures. I transferred two additional figures from the Siberian Veterans I did last week to beef up the numbers a bit. They are dressed in either greatcoats or quilted jackets, many wearing mitts, or having them dangle from 'idiot strings'. The selection of heads provided a lot of choice from a variety of fur hats, pilotkas, or helmets, with many of the faces wrapped in scarves. The only criticism I have with the set is that the weapons sprues don't provide enough basic Moisin-Nagant rifles. but I was able to make up the shortfall by carving away telescopic sights, or grabbing rifles from the sprues that came with the box of Siberian Veterans.

These were all painted in my usual style, starting with a dark brown primer. All the basic colours were painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. At times it was a little tricky getting the brush into the deep recesses. I might try a method I saw on YouTube where all the parts were painted while still on the sprue and then assembled. I used AK Diorama products 'Snow' and 'Snow Sprinkles' on the bases to give them that frosty look. The dead grass is Vallejo Scenery 'Wild Tuft - Beige'. The end result is a platoon of three identical 10 man sections, each with a submachine gun, a mix of Moisin-Nagant rifles and carbines,  a DP-28 light machine gun team, plus some hand grenades and Molotov cocktails, and a section of 9 conscripts armed with rifles, all led by a senior officer with a pistol. Add to that a PTRS-41 or Simonov anti-tank rifle team, ready to engage the Fascist invaders. 

The Bolt Action rules for Soviets allow a free section of conscripts as one of the force selection options, or I can use them to increase the strength of the other three sections up to 12 men, so this group will provide me with some options on the wargames table of either bigger sections, or a free group of 'Grot'. They will be teamed up with my Soviet Winter Support Group and my whitewashed T-34 for a battle in the snows of Russia.

 

A platoon of Soviet infantry in Winter uniforms

Veteran Officer and Anti-tank Rifle Team

Squad No. 1

Squad No.2

Squad No.3

Призывники Фосетт-авеню

 This was the last of my Soviet infantry. The last of the Soviets? Stay tuned for the next submission.

Challenge Submission #14 - Siberian Veterans and Soviet BA-10 Armoured Car

 

More Soviet infantry were completed for the Challenge, specifically 32 Siberian Veterans from the Warlord Games boxed set of the same name. The set consists of four identical sprues of multipose miniatures, enough to build 32 soldiers, plus two metal figures. (I diverted two of the plastic figures, and some of the Mosin-Nagant rifles to my Winter Soviets to beef up the numbers.) You also get a selection of metal heads and arms to add further variety to the figures, such as captured weapons, bandaged heads or hands, Eastern facial features, etc. 

These were all painted in my usual style, starting with a black primer. All the basic colours were painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. The end result is a platoon of three 9 man sections each with two submachine guns, a mix of Mosin-Nagant rifles and carbines,  a DP-28 light machine gun team, one Tokarev semi-automatic rifle, plus some hand grenades, Molotov cocktails, and a captured Panzerfaust, all led by an officer with a pistol. Add to that a sniper team, a soldier dragging a Maxim machine gun, and a Commissar with a speaking trumpet. 

 

Siberian Veterans defending the approaches to Moscow

Bandaged heads and hands

Bandaged hands and captured Panzerfaust

Captured MP40, Molotov cocktail, and bandaged heads

Sniper team with scoped Moisin-Nagant rifle

Machine-gunner pulling a Maxim and an officer with a pistol

"The man with the rifle shoots, the man without the rifle follows...."

Next we have a Soviet BA-10 heavy armoured car which is a 1/48 model by Uni-Model, another Ukrainian company stocked by my local hobby store. Like the Ace Model kits that I built earlier, these are very detailed and contain a lot of parts that I probably could have left out given that I am building something for the wargames table. The parts lack locating pins and holes to correctly align them, and the diagrams didn't always give a good representation of exactly where things were to be positioned. (One diagram actually had all the part numbers printed backwards. 😱) I also found the plastic to be a bit fragile, and a few pieces broke when trying to carefully cut them from the sprue. In the end I left off the optional tracks from the rear wheels and some of the tiny etched brass parts, and replaced the headlights and the steps outside the side doors with something more robust than provided by the model kit. 

Despite all the trials and tribulations, I eventually got it all together. It was primed black using an airbrush and then painted Russian green using acrylic paint. Highlights and decals were applied, and then the entire vehicle was given a wash of AK Interactive Dust. (In case anyone is wondering what 'А. Невский' means, it is for Alexander Nevsky, a medieval military leader who defeated the Teutonic Knights in 1242.)

 

The headlights were made from round push pins filed flat on one side

А. Невский on the side, just above the rear wheels

The plastic piece to support the step on the side was replaced with florist wire

 There is still another batch of Soviet Infantry in Winter uniforms coming down the pipe. Stay tuned. Thanks for reading.

Challenge Submission #12 - Soviet Army (Winter) Support Group and T34/76

 

Having completed all my PSC Soviet troops in Summer uniform, it was time to move to those dressed for colder weather in front of the gates to Moscow. I didn't get a huge number of miniatures completed this week as I have been experimenting with different materials to get a 'Winter look' to not only the bases, but the tank as well.

First up is a boxed set of Soviet Army (Winter) Support Group sold by Warlord Games. It consists of a Soviet HQ of two officers, a radioman, and a medic tending a wounded soldier, a Soviet Maxim MMG team, and a Soviet 82mm medium mortar team, all dressed for the cold in a variety of greatcoats, fur hats, felt  winter boots, etc. Each of these groups can be purchased separately, but you save $5 by getting the 'package deal'.

All of the minis were painted using Vallejo acrylics followed by the application of the Army Painter Strong Tone Quick Shade. This is pretty much what I have done up to this point with the Summer Soviets. I used AK Diorama products 'Snow' and 'Snow Sprinkles' on the bases to give them that frosty look.

 

Soviet Army (Winter) Support Group

Soviet HQ (Winter)

Soviet Maxim MMG and 82mm Medium Mortar teams (Winter)

 The second item is a 1/48 scale Tamiya T34/76 in Winter camouflage. The kit was very easy to assemble, even though a lot of the track comes as individual links. The chassis is made of metal, so it actually has some weight to it. 

Once assembled, the tank was primed dark brown, and then painted olive green using Tamiya acrylic paint. Since I already have four T34/76s in various shades of green, I wanted to put this one in Winter colours to go along with my Winter Soviet infantry. I first applied AK Chipping Medium to all the areas that I thought would get a lot of wear and allowed it to dry thoroughly. I then applied a heavily diluted coat of white acrylic paint to give it the appearance of whitewash that was starting to wear off. Once that was completely dry, I used water and a brush to remove the chipping medium to reveal the olive paint underneath. Finally I applied AK Interactive Splattereffects 'Wet Mud' to the tracks and underside to make it look like it had been driven during the Rasputitsa. I may decide to add more 'Wet Mud' to the road wheels, but I am calling it done for now.

 

 This is my first foray into Winter figures, and I am happy with the results. Now that I have the method worked out, I will be ramping up production to meet the quotas of Stalin's latest five-year plan.

Challenge Submission #11 - A Mixed Bag of WW2 Vehicles

I had a hard time focusing during the last week of January, ricocheting around from project to project without seeming to get closer to completion. Eventually things started falling into place, and I ended up with 9 completed vehicles. Some of these have been sitting in my 'IN' box for over a decade, so it felt good to finally get them ready for the gaming table.

First up is a DUKW with a British RASC driver. This was a toy dating from the 1960s that originally belonged to my younger brother. It suffered some 'battle damage' at some point, and my brother was no longer interested in it. I thought I might be able to fix it, and it seemed like the right scale for 28mm gaming. In fact, measuring its length and comparing it to the length of an actual DUKW, it works out to be 1/56. The only 'flaw' is that it only has a single axle in the rear instead of two. I have no idea who manufactured it, but it reads 'NOVELTY' and 'Made in Hong Kong' on the bottom. 

 

The broken pieces near the back and the front right wheel well were filled in using epoxy putty, while the front windshield was fashioned from pieces of clear plastic cut from a CD case. The crates and fuel drums came from a Bandai Maultier kit, and the driver is an old Bolt Action jeep driver that I had in my 'bits box' along with the rolled up tarp. It is now ready to ferry supplies or a squad of commandos across a river or from ship to shore.

 

Next up is a Kübelwagen Type 82/3. This was a mock-up scout car/armoured vehicle with a machine gun-turret atop the cabin. It was apparently built for decoy and training purposes. I bought this from Wargames Foundry decades ago. It came with the Feldgendarm, but I only painted up the 'Kettenhund' as I couldn't decide the colour scheme that would be most appropriate. Eventually I thought Panzer Dunkelgrau would do just as well as any other colour, and now it's finally done.

 

 Third on our list is a Bandai 1/48 SdKfz 3 Maultier that I picked up off Ebay. This was another project where I couldn't decide what colour to paint it, but I finally decided to go with Panzer Dunkelgrau with an Olive Green striped camouflage suitable for the Russian Front. The tarp was painted Tan Earth and given a wash of GW Agrax Earthshade. I then liberally applied Vallejo European Dust wash everywhere. The kit came with a cargo of four petrol drums and two large crates, but since nobody would see them with the tarp in place, I used them for the DUKW.

 

 Next is a 3D printed French Panhard 178 armoured car that was from the same run as the two painted by Fellow Conscript DallasE. I used a different paint scheme that is based on a surviving example in the Musée des Blindés in Saumur, France. I used Vallejo Gunship Green and Chocolate Brown with a sharp black line in between. I left off the fifth wheel, but added a muffler on the right side made from a piece of plastic sucker stick. Sometimes it helps a recce unit to not be heard, as well as not be seen. The decals were all ones that were kicking around in my files, so I didn't have to free hand any roundels. 

 

The fifth item is a group of four M5 Half-tracks to provide some additional armoured lift capability to my 2nd Canadian Division. I am not sure if these were used in any of the infantry divisions, so I may have to mark them up for the 4th Canadian Armoured Division. The models are either Corgi or Solido 1/50 vehicles that all came in different colours and configurations. One was an ambulance version that had a tarp on it, and the back door was cut out. The tarp was tossed in the 'bits box' while the missing door was replaced using thin plastic card. Everything was painted a uniform colour and then 'muddied up'. The verdict is still out on what stars should be added and where, but the vehicles are now ready to take to the field and move a platoon of infantry in relative safety on the battle field.

 

 The last vehicle of this post is a Warlord Games 1/56 resin and metal M10 Achilles mounting a 17 pounder. While this is a newer acquisition compared to some of the other vehicles, it sat on the shelf for a while before being assembled. When it arrived, the tracks were warped and didn't form a clean fit with the chassis. A bath in some boiling water and some careful pressure in the right places straightened things out to an acceptable degree and things proceeded readily from there. Two of the crew in the turret are part of the resin casting while the third crewman is in metal. All came with separate heads which can provide some variety if you want to field more than one. The tarps were added from my 'bits box'. 

The only two Canadian units that used 17pdr M-10s were the 4th Anti-Tank Regiment RCA of the 5th Canadian Armoured Division; and the 7th Anti-Tank Regiment RCA of the 1st Canadian Corps Artillery. Both Regiments would have had two batteries of towed 17pdrs and two SP batteries with 17pdr M-10s

 

 As I said in the title, it is definitely a mixed bag of vehicles, but they are now all done.Thanks for reading.

 

Challenge Submission #5 - За Родину (For the Homeland) WW2 Soviet Armour

Since I had painted up a large force of German armoured vehicles in an earlier submission, Stalin was starting to look at the Molotov–Ribbentrop Pact with growing suspicion. It was now time to increase the Red Army's tank arm. Ready for this week's report are the following: a BA-20 armoured car, a trio of BT-7 fast tanks, a KV-1, and a Lend-Lease M10 Wolverine.

First up is a BA-20 armoured car, which is a 1/48 scale plastic kit from Ace Models out of Kyiv. I did another model by this company in my first submission as part of my early war Polish Army reinforcements. I found these kits to be finely detailed, but a bit fiddly to put together. Instead of the body being a one- or two-piece molding, it consisted of separate eight pieces. After assembly, the vehicle was primed black with a rattle can, and given a base coat of Russian Green. This was followed by some drybrushing along raised surfaces and edges with Vallejo Olive Green. After the decals were applied, it got a wash of Vallejo European Dust.

 

Up next is a platoon of three 1/56 scale BA-7 fast tanks from Warlord Games. The Soviets produced over 5700 of these between 1935 and 1940, and in 1941 it was the main cavalry tank of the Soviet army. However some 2000 were lost during the first 12 months on the Eastern Front.  These are resin castings with metal gun barrels and turret hatches. The castings were very clean, and came as just two pieces - the body of the tank, including all the tracks and road wheels, and the turret. The kits all included a metal tank commander of which I used one. They also included flame and smoke markers consisting of a wooden base and some coloured wool in white, black, and orange-red to glue on. They were painted in a similar manner to the BA-20 armoured car.

 

 Now we have the "Russischer Koloss" or "Russian Colossus", the mighty KV-1 heavy tank. The Soviets produced over 5,000 of these between 1939 and 1943, with about 500 in service at the start of Operation Barbarossa. This is another 1/48 scale model, this time from Hobby Boss. When first looking at the kit, especially with all the separate track pieces, I was a bit intimidated. However it went together very smoothly, and had a lot of interesting details such as etched brass parts, and fine twisted copper wire for the tow cables. The painting technique I used was the same as with the previous vehicles. I used one of the three options for decals provided by the kit, specifically that of the 12th Guards Armoured Regiment, 1st Moscow Mechanized Division, August 1942.

 

Lastly I did a Lend-Lease M10 Wolverine, which is a repainted 1/50 scale Solido diecast model that I was given by fellow Conscript DaveV. I already had a 1/56 scale resin model of the M10 Achilles with a 17-pounder from Warlord Games, and the size disparity was too great for me to ever field the two models on the table together. The solution was to send the Solido M10 to the Eastern Front. Approximately 52 M10s were supplied to the Soviet Union through Lend-Lease. They were used to form two self-propelled artillery regiments. The first was the 1223rd Self-propelled Artillery Regiment of the 29th Tank Corps, part of the 5th Guards Tank Army. This unit served on the 3rd Belorussian Front in 1944, taking part in summer campaigns in Belorussia, the Baltic, and East Prussia. The 1239th Self-propelled Artillery Regiment was part of the 16th Tank Corps, 2nd Tank Army. It fought in Belorussia and Poland in 1944.

Painting this vehicle was pretty much as per the rest of the vehicles in this post. The only change was the addition of a gun crew, which was needed due to the open-topped turret. The three crewmen were converted from some spare Soviet tank crew that were left over from a Bandai T34 kit plus two sets of 'seated legs' left over from some unused Panzer crews. I also added a .50 cal machine gun from my bits box.  In the end, I had to trim a little off the bottom of their legs so that they would all fit in the turret. I am pretty pleased with the way they all came together.

 

Thanks for reading.