Showing posts with label F**k You Testors. Show all posts
Showing posts with label F**k You Testors. Show all posts

Tuesday, March 18, 2014

Legion Project WIP - Work, But Not So Much Progress

Tactical marines from the 12th Legion - the World Eaters

This "Work In Progress" post on my 40k Space Marine Legion project is mostly work, and not so much progress.  I am trying to get all of the models assembled and primed before I start painting them, but this has created a multi-week absence from painting anything, which makes me nuts. As a result I am doing a bit of both - building and priming a bunch of figures, and then test-painting one or two along the way for a break.

Sons of Horus tactical support marines wearing Mark IV power armour  carrying plasma guns

I have assembled the main chunk of the legion marines - 30 Sons of Horus, 27 World Eaters and 10 Emperor's Children.  I still have to assemble a couple of assault squads, some more heavy weapon gunners and some command figures yet to build and prime.  There is only one vehicle at this point - a Land Raider - but that is going to wait until most of the infantry are finished.  The Forge World vehicles for the Legion collection are, of course, amazing, but costly, so that "part" of the Horus Heresy is going to have to wait.

World Eater heavy support marines in Mark III armour carrying multi-meltas
Besides the initial intra-legion fighting on Istvaan III will be fun to play on the table as a mostly infantry affair.  For those who may not be familiar with the story, Horus' first step in his plan to take down the Imperium was to purge his own Legions of those who it was felt would not back his rebellion.  These "unreliables" from the four legions - the Death Guard, his own Sons of Horus, the World Eaters and the Emperor's Children - were all ordered into the "first wave" of the assault against the rebellious planet of Istvaan III. 

Sons of Horus heavy support marines rocking some heavy bolters
Horus let the first wave assault play out, then cut off communication from the first wave and bombarded Istvaan III with the chilling "life eater" virus.  The population was wiped out in minutes, the surface of the planet all but obliterated in an ensuing fire-storm, but many of the Marines of the first wave, warned by some stalwart loyalists, survived!  And boy, they were pissed off - betrayed by their own! So among the charred ruins of Istvaan III, a second wave descended to the planet's surface, intent on scouring the surviving loyalists of the first wave, finishing up-close what the orbital bombardment had started. The Horus Heresy was under way!

World Eaters Centurion (company commander) in fancy Mark IV armour
I imagine Horus, knowing what he had planned, did not place a lot of vehicles in amongst the first wave of troops - he would want to save those for his later operations. Horus' mop-up operations would likely use tanks and vehicles, but the loyalists were hunkered down in ruined urban areas to hold out, hoping to extract vengeance in a last stand.  For the rebels, there was only one way to get at the hold-outs, and Land Raiders and Rhinos would not necessarily help. So I imagine our first few Horus Heresy games will be mostly infantry vs. infantry, fighting amongst an urban setting so wrecked it makes Toxo IV look like an Amazon Forest nature preserve...and I can't wait!

Test models again - the chap with the crested helmet it the sergeant.  In the Legion army list, tactical squads can be as large as 20 marines!

I have finished five test models so far from the World Eaters Legion. I liked to think I am "used to" painting white (see here for an example) but I have been struggling with it on the Space Marines - power armour is of course very different from 18th/19th century Austrian uniforms. Duh - of course, right? In addition to the Testors Incident with the first model, overall I find the white so far looking a bit "chunky" or "chalky", a product of the thick pigment and (too)quick-drying GW paints on the marine armour.

Another view of the test models - you can see the decals on the shoulder plates a bit from this angle

So I am trying to thin down the paints with some kind of medium/paint extender. This sort of artsy stuff - the stuff most of you out there do routinely, I know - slows down the painting process a lot compared to what I am used to.  I lack the patience, and frankly the skill, to make use of these techniques in a way I feel is consistent and easily repeatable. On the other hand, the only way to learn is to try it out, right?

Comparison photo - I made an effort to thin out the paint layers on the figure on the left; still a lot to practice needed

I experimented a bit on a figure last night. It improved a little...hopefully practice will improve things, particularly the speed!  I believe moving over to Vallejo paints will improve things as well. We'll see!

I know Byron is working on some test models as well (in addition to a couple of final entries to the Analogue Hobbies Painting Challenge - I've seen the previews - they will be awesome - congrats and be sure to check out Analogue Hobbies for the final entries!) so watch this space for some spooky Death Guard...

And this project, like a good heresy, is starting to spread amongst other members of the group...I won't give anything away for now, but lets just say I think Horus would approve! Horus for hope (inside joke)! Keep your planning up, gentlemen...we will announce the action at the appropriate time...

Tuesday, March 11, 2014

Legion Project - Adventures in Test Painting

World Eater test model - post-Testors-incident

I have recently launched on a "New Insane Project"TM of collecting and painting some Legion models from Forge World's Horus Heresy line. Like many gamers, when embarking on a new project, I like to paint a test model - a chance to see if the colours work, if there is anything I should watch out for etc, maybe I need new paints or new colours etc.  It's fun to work on one figure to iron out the approach a bit before repeating 20 or 30 times.

Legion assembly in progress - figures await priming

So far I have been concentrating on assembling the models, but I couldn't wait to try painting one, so I selected a figure representing a Marine from the World Eaters Chapter and decided to test my approach to his paint scheme.

Mix of World Eaters and Emperor's Children waiting for black base coat

This figure is the first one I have ever primed using an airbrush and Vallejo black surface primer.  Byron has been happily telling me about how he primes and basecoats his figures using an airbrush, avoiding the nasty side effects of trying to use the more conventional spray primers, a particular challenge during the winter (and especially this horrifying winter of 2013-14).

Magic stuff! Just magic!!! I'm now a lobbyist for "Big Primer"
I regard airbrushes as the prima donna tools of hobbying - needing so much to deliver so little - and my airbrushing skills are non-existent.  Airbrushing primer on in the comfort of your own basement sans the issues of spray primer? Sounds too good to be true! But Byron was patient and insistent, and even lent me a workable single-action airbrush to try it out! And it actually works! It even sticks to Forge World resin!

What is ever better is that you can brush-paint the stuff on after to follow up.  I know many of you reading this will be thinking "Greg, you idiot, this stuff has been around for a long time."  And you're right! I just get hide-bound...but for other stubborn people out there - TRY THIS STUFF!! And even try the airbrush!!

More WIP on the assembly - I love the rotor cannon gunners!
World Eater test model - waiting for a decal on the right shoulder.  Note glossy finish to undercoat the decal area and avoid "silvering"

The test figure is a regular vanilla tactical marine in Mark IV armour carrying a "Tigrus Pattern" bolter. I put the basic paint scheme in place, and thought it best to test out a decal on the right shoulder pad.  I plunked a Roman numeral "XII" down on the shoulder plate (the Worlds Eaters were orginally the 12th Legion).  To eliminate the "silvering" from the decal, I had applied a coat of gloss finish in the decal area, and once the decal had dried and set, I needed to knock off the gloss finish with a coat of Testors's "Dullcote".

Another pre-decal progress photo
I've done this for decals hundreds of times...more times that I can count. Testors has never let me down (unlike Krylon - never again Krylon). So imagine my surprise when I saw the Testors had...COMPLETELY F*CKED UP THE FIGURE.  While the gloss finish on the decal had in fact vanished, the Dullcote had also covered the figure in a white, scaly texture - like he fell in a snow bank here in Winnipeg. F*CK!!!!

WTF?!?!?!?! F**K YOU TESTORS!!!!! JUST F**K YOU!!!! A World Eater in a blizzard...where did his drop land?

Sigh.  These Forge World figures are not cheap, and no blog post is long enough to list all of the dark thoughts uttered when I saw what had happened.  Fortunately, I was able to mostly save him by re-painting over the affected front area.  The figure now has a scaly, rough and slightly-over-weathered appearance - forshawdowing, perhaps, the fate of the 12th Legion. But he will be OK, and won't stand out too badly when mixed with a unit.

A re-coat of paint later...looking not too bad

I am mightily pissed, as Testors has never, ever, ever, ever given me a problem like this before.  Cue Byron suggesting I airbrush on the Vallejo matte finish :) Maybe I will try that, but in the interim, I am trying to find a new can of Dullcote...
The finish on the legs is a little rough, but from this distance everything turned out OK - won't be as noticeable when he's with a unit of 10 figures

These Forge World figures are a lot of fun. You can see the posing on this particular figure is not great (he's not holding the bolter in a particularly "natural" combat pose). It took me a while to get the hang of assembling them, but holy cow its fun - once you get rolling.

So that's one figure down...still a long, long way from a game...but progress continues!