Saturday, January 8, 2022

Challenge Submission #1 - Ruined Hamlet and Stone Bridge

 This the first year in which I have participated in the Analogue Hobbies Painting Challenge. My submission for the first week of painting consisted of a variety of terrain pieces in 28mm scale to be used with Bolt Action or The Great War.

 The Ruined Hamlet consists of four models of a Ruined Farmhouse in hard plastic from Warlord Games that I bought during a sale of 'four for the price of three'. They can now be purchased individually, or as a 'Ruined Hamlet' box of three. Each set consists of a two story building plus a one story shed. While they are quite generic for 'somewhere in Europe during the last 400 years', they will work best for either WW1 or WW2. Assembly can provide some variation as to how the walls fit together, I would say that there is definitely a 'preferred way'  that results in a 'best fit'. Once all the building and rubble piles were glued together, I mounted them on bases made from some pieces of scrap 3mm Masonite board onto which I had scored lines to look like floor boards. I then glued down some coarse sand around the walls to blend them into the bases. The ruins were primed in black using a rattle can, and then painting using Vallejo acrylics. Once the painting was completed I added some flocking along the edges.

 




 The Stone Bridge is manufactured by Italeri, but marketed by Warlord Games. It comes as a 6 piece hard plastic boxed set that goes together very smoothly to give you a single arch stone bridge that would work on any battlefield in Europe for the past 500 years. After assembly, like the ruined hamlet, it was primed black using a rattle can and painted with a selection of Vallejo acrylics.



 Thanks for reading, and good luck to my fellow Conscripts who are also participating in the Painting Challenge.

Thursday, January 6, 2022

Painting Challenge Submission 1 - Space Marine Characters

Bladeguard Ancient (left) and Chaplain (right) for the Raven Guard. Figures from GW.

As you have seen recently on our Blog, Curt's Analogue Hobbies Painting Challenge is back! A number of Conscripts are participating, and already sharing their work here, which is awesome. I'll be starting that as well - the first bit of work to share for my Challenge continues my efforts to build up a force of Raven Guard Space Marines for Games Workshop's "Warhammer 40,000" setting. These two figures are part of that ongoing effort - both are multi-part plastic figures from GW's "Indomitus" box set. They are painted in the colours of the Raven Guard Space Marine Chapter.

Bladeguard Ancient

The Bladeguard Ancient - an ominous fellow who brings this inspiring battle standard to the heat of battle in order to inspire his fellow Marines. As one does.

In Space Marine forces, the "Ancient" is usually the Marine who carries a flag into battle (unless they are a Marine interred into a Dreadnought, but that is a whole other thing). Carry a flag into battle, 40,000 years from now? Well, yes, as one does. Warfare in the dystopian future of Warhammer 40,000 carries with it a sort of dark-age aura. Thus we have genetically-modified super soldiers like the Space Marines doing baroque things like carrying flags and standards into battle. A symbol to rally around is a universal combat motivator, even 40,000 years into the future. This member of the already-scary "Bladeguard" makes his buddies fight even harder with his inspiring battle standard.

The standard is huge - it's a big model. Very over-the-top, and a lot of fun to paint.

But let's reflect on that battle standard a bit, as there is something odd here. Is that a flag? Well, no. Flags are nice, but, what if we kicked things up a notch? Why stop at telling the story of an inspirational martyr? Why stop at putting this martyr's image on a flag? Why indeed, when you can just BRING THE MARTYR'S REMAINS WITH YOU TO WAR? Makes sense to me! Not sure who the skeleton belonged to - maybe a Marine who fell fighting Horus' traitors during the Heresy? Yes, probably that. 

As GW said, this guy is "handy" in a fight...amirite? 

I have to hand to it to the figure sculptors/designers for GW's "Indomitus" box set. They leaned into the sillier aspects of the setting with the right mix of OTT inspiration and affection to create some lovely and fun figures to paint and game with. Look at this nut case! He is CARRYING A SKELETON HAND TO SLAP PEOPLE WITH. I love this. I wish I had five more of these guys to paint for other Chapters.

Chaplain

"Looking for inspiration? I CAN HELP WITH THAT..."

In the year 40,000 we gain an insight into the role of the Chaplain in a Space Marine chapter with a quick glance at his rules. What's this here? "Litany of Hate"? Isn't that the name of the algorithm Twitter uses? Anyway, sounds about right for Warhammer 40,000. Whether it is the Litany of Hate or the Litany of Starbucks, this fellow will jump into battle to inspire his fellow Marines to even greater deeds of heroism in the name of The Emperor, who is of course no longer around, but Is Still Always Around.

This figure is modified, for a couple of reasons. I needed the original top of his "Crozius Arcanum" (a.k.a. fancy baton) for another project. But then when I wanted to paint this fellow, I couldn't just have him carrying a stick, so I cut another skull bit from elsewhere on his armour, and stuck on the top of the baton to create a satisfactory badge of office.

I also love his fancy pistol. Not just because it looks heavy, and has a seal on it, but its name "absolvor" - nice that the Space Marines combine the notion of "absolution" and "revolver". Ah, I love 40k. As I said, the designers for this box set really found a sweet spot - the "Indomitus" box is a tribute to the things that make Space Marines a bit silly, very nicely done. 

I just assume those are all "thank you" notes pinned to his armour, courtesy of fellow Space Marines he has inspired...

I also replaced the un-helmeted head with a Mark III marine helmet. I did this because it is nice to have 30k shout-outs on 40k models, and also because I hate Space Marine figures without helmets. Space is dangerous. The Emperor spent Lots Of Money to create you. Wear your damn helmet.

When you participate in Curt's painting challenge, you are competing essentially against your own target. I have a goal of 1000 points worth of painting...these fellows got me 14 points - so a ways to go, but there are a couple months ahead, so it should be fun! I look forward to sharing more work here, and seeing all of the other work done by fellow Conscripts.

Wednesday, January 5, 2022

From the Challenge: Nazgul on Fellbeast and 1/48 Panzer III Ausf M

 

Last year (related to the Challenge!) I picked up the Battle of Pelennor Fields box set from Games Workshop, with the intention of painting this Ringwraith on a Fellbeast. And less than a year later, here it is already!


The paint scheme is pretty straightforward - tones of grey with the leathery bits washed (repeatedly) with GW Reikland Shade. The clever bit about this ain't the painting though - it was the construction of the model...


See?!? The kit comes with two "necks" for the Fellbeast, as well as two riders - both a standard (!) Ringwraith and the Witch King!


Here's the Witch King with his flaming sword. I used magnets to facilitate easy back-and-forth swappery. 


I countersunk a pretty big magnet into the body of the Fellbeast. Not too hard to do.


Then, I cut off the pins on the necks and superglued on 5mm magnets. They hold the necks on pretty securely and I'm happy with that. Nice of GW to provide two different necks as well as riders.


Next up was a Bandai 1/48 Pzkpfw. III Ausf M. While still equipped with the venerable KwK39 L/60 main gun, there were 250 examples of the Ausf M produced between October 1942 and February 1943, and they were deployed mainly to replace frontline losses - including at Kursk.


I painted the tank in an early-'43 camo scheme taken from the Panzer Colors book - yellow over dark grey. The grey is Mechanicus Standard Grey and Dawnstone washed with Nuln Oil, with Zandri Dust as the yellow overcoat. Decals are from Pedinghaus and the decal folder.


The Ausf M had a modified exhaust valve to facilitate deep wading, as well as the triple smoke dischargers. 


I did a bit more weathering on this model than I did on the previous Pzkpfw I models... some sponge chipping and dust application with Steel Legion Drab drybrush. 


I like how the yellow and grey camo turned out on this one. It'll be a good addition for mid-war gaming and it's in the correct 1/48 scale :-)

Happy New Year!

Saturday, January 1, 2022

Second World War Canadians

With many of the Conscripts involved in the Analogue Hobbies Painting Challenge, there have not been many posts on our blog page lately, so here is another one of my ‘Armies in Review’ posts. When I started doing Bolt Action my first army of choice was a Canadian force, and as I had been a member of the Queen’s Own Cameron Highlanders of Canada in my younger days, I wanted to paint up my infantry units marked for the 2nd Canadian Division, and all the supporting units marked for those that actually supported the Camerons in Northwest Europe in 1944-45. At the moment I can currently field two 38 man infantry platoons, a company headquarters, a 6pdr anti-tank gun, 3 Vickers medium machine guns, 2 medium mortars, a carrier platoon of four Universal carriers, a few 25pdr field guns, a forward observation officer, a reconnaissance troop of scout and armoured cars, a troop of Sherman tanks, and a pair of Ram Kangaroo armoured personnel carriers.

The full force on parade.

Vickers machine gun teams, mortar teams, and 6pdr anti-tank gun

The machine gun teams are a mix of manufacturers being (from left to right) old school Bolt Action, Crusader Miniatures, and Westwind Miniatures. The team 'on the move' is also by Westwind. The 6pdr anti-tank gun and the mortar teams are by Battle Honors.


Carrier platoon to rapidly move the support weapons

The two carriers on the left are metal models by Battle Honors, with crews and extra stowage by Bolt Action. The two carriers on the right are resin casting by Bolt Action, as are the crews. The dimensions for the Battle Honors carriers are a bit off, primarily in that the part of the vehicle in front of the driver is too short. They end up being wider than the Bolt Action castings, but the same length.


Ram Kangaroo armoured personnel carriers

The Ram Kangaroos are conversions using the chassis from a 1/50 scale Solido Grant tank and a resin kit from Quarter Kit. I had purchased the Grants as something to use with my Soviets, but once I had enough T34/76 tanks, they got repurposed. The conversion kit went together very nicely, but I think they are no longer available.


Company headquarters, with supporting artillery in behind

All the figures are from the Westwind range, with the jeep being a repainted 1/50 scale Corgi diecast model with a crew from Bolt Action that was specifically marketed to go with the Corgi jeeps. At some point I have to do a conversion on the officer to replace his forage cap with a proper Highland Balmoral.


First platoon of the Queen's Own Cameron Highlanders of Canada

The platoon consists of a headquarters, a PIAT team, a light mortar team, and three 10 man sections, all wearing the blue divisional patch of the 2nd Canadian Division. The infantry sections are a mix of Westwind Miniatures and Crusader Miniatures. The Westwind figures are closer to true 25mm size, and I really love the animation in the sculpts. Each section consists of a section commander with a Sten gun, a Bren gun team and seven riflemen. The officer, NCO, and radio team of the platoon headquarters are Westwind castings, and the PIAT and Mortar teams are from Crusader.


Second platoon with the same composition as the first


A reconnaissance troop of two scout cars and two armoured cars

The reconnaissance regiment of the 2nd Canadian Division was the 8th Reconnaissance Regiment (14th Canadian Hussars). The Daimler 'Dingo' scout cars and the Daimler armoured cars are repainted Dinky Toy diecast models that I picked up cheaply from eBay. All had seen a lot of wear and tear, and much of the original paint had worn off, which was the main reason why I got them for the minimum bid. I didn't mind about the paint as I planned to repaint them anyway.


A troop of Sherman tanks 

The 2nd Canadiain Division regularly received armoured support from the 2nd Canadian Armoured Brigade. Since this gave me another opportunity to represent a home town unit on the gaming table, these Shermans are marked as 'C' Squadron Fort Garry Horse. They are all Solido 1/50 diecast models. Two were originally the version of the Sherman with the 105mm howitzer. On one of these I replaced the howitzer barrel with an appropriate 76mm barrel, while the other was converted to a Sherman 'Firefly' with a 17pdr anti-tank gun using a resin kit from Quarter Kit. All have extra track sections welded to their hulls to beef up their armour, as well as plenty of gear stowed on the rear deck. The extra track and stowage are resin casting.


25pdr field gun, transport, and a forward observation officer

One of the artillery units that was part of the 2nd Canadian Division was the 4th Field Regiment Royal Canadian Artillery. All the vehicles sport the proper tactical signs for that unit. The field gun, limbers, and crew are Battle Honors casting, while the Quad Field Artillery Tractors are again Dinky Toy diecast models acquired off of eBay and repainted. 


Me (on the right) in a Universal carrier

The above photo was taken in front of the Manitoba Legislative Building during the 100th Anniversary parade of the formation of the Queen's Own Cameron Highlanders of Canada in 2010. The vehicle bears the correct tactical signs for the Camerons. Thanks for reading. I wish everyone all the best in 2022, and good luck to all the Conscripts who are involved in the Analogue Hobbies Painting Challenge.

 

Ogre Miniatures - 6mm Combine Mk. III and Paneuro Mobile Infantry and Heavy Tanks - Painting Challenge Submission #1


I have played Steve Jackson's game Ogre since it was a Metagaming pocket game in the late 1970's. I even got a detention from the Principal at St, Paul's High School once, playing Ogre with a friend instead of attending study hall. 

For those unaware, the game is a fast playing sci-fi game pitting giant, A.I.-controlled atomic supertanks (the "Ogres") against futuristic combined arms forces consisting of various tanks, hovercraft, artillery, and powered Mobile Infantry. Each armour or infantry unit (or each Ogre subcomponent, like its main battery, or its tread units) has a rating for move, attack, and defense. A simple CRT gives odds for the results of (combined) attacks, which include destruction, disablement, or NE. Any reasonable Ogre attack will disable or eliminate a unit, but there are a lot of enemy units trying to slow it down and pull its teeth. 

The original vehicle designs, by Winchell Chung, have stood the test of time. The tall sensor tower of the North American Combine Ogres, and the sleek Paneuropean tanks and blowers, have become iconic. In recent years, Steve Jackson Games started producing 6mm scale plastic models of the various Ogres and Paneuropean ground forces. They have future plans to do Combine tanks, hovercraft, etc. 

My first Ogre is a Combine Mk. III.  To start my Paneuro collection, I completed a battalion of Mobile Infantry; each of the 42 models represents a single 4-6 man squad, and each of the 14 3-model stands is a platoon. They are supporting 8 Heavy Tanks; fast, hard hitting AFV's, whose sole weakness is the relatively short range of their tac nuke shells.

After assembly, I primed all the units with GW Chaos Black, and laid in flat white zenithal highlighting with an airbrush. I went with a traditional Combine = red, Paneuro = blue paint schemes. For the Ogre Mk. III, the base red was accomplished with a light spray of Army Painter Dragon Red primer. I then laid in several glazes of GW Druchii Violet for shading. I painted highlights and some light weathering/damage using various artists' oils, especially Cadmium Red, Cadmium Scarlet, Cadmium Yellow, and Peach Black.






For the Paneuropean forces, the base blue of the tanks and infantry consisted of several washes of GW Drakenhoff Nightshade. I then laid in highlights and details with oil paints, and did some light weathering with powders. The infantry bases were finished with GW Martian Ironcrust, to simulate the blasted landscape of the Ogre Designer's Edition map board (seen in a couple of the photos).






The relative sizes of the Paneuropean models against my Combine Ogre Mark III can be seen in the comparison photos. I had actually prepped the Ogre for last year's Analogue Hobbies Painting Challenge XII, but only started painting it last month; it does not count for this year's Challenge, only the tanks and MI do. 

I have assembled all the models in Ogre Miniatures Set 1, to which set all the above models belong. Next to be painted for Ogre Miniatures are an Ogre Mk.V, some GEVs (armed hovercraft), Missile tanks, Howitzers, and a Command Post. From Ogre Miniatures Set 2 I also have in queue a few Paneuropean heavy units, a couple of Super Heavy Tanks and an Ogre variant, a missile-rack armed Fencer. Check out all the OIgre Miniatures models available from SJG  here:  http://www.warehouse23.com/products?taxons%5B%5D=558399032-sb



Anyways, (42 x 0.5) points of 6mm  Mobile Infantry, and (8 x 2) points of 6mm Heavy Tanks should come in at  a modest 37 points for The Analogue Hobbies Painting Challenge XII. Add 20 points for Caprica (Doomed). The mark of a good Ogre player is how they handle their infantry, but the poor bloody MI are going to die as fast as you send them in, Bi-Phase Carbide battle armour notwithstanding. This should total 57 points for my first entry into this year's Challenge.


From the Challenge: 1/56 Panzer I Ausf Bs from Bolt Action

 

Well, after playing Fredrick's excellent "Danzig Post Office" Bolt Action game a few weeks ago, early-WW2 fever has flared up again. Fortunately this coincided with a) a Warlord Games order pending from Frederick, and b) the "Tanksgiving" buy-two-get-one-free promotion. So I duly added three Pzkpfw I Ausf. B tanks to his order.

 

The models duly arrived and painted up very quickly indeed. They're 1/56 scale though - unlike most of the rest of my collection - so I boosted them a bit by putting them on bases. The models are pretty nice though - all resin except for the MG barrels and headlight, plus each one came with a metal commander half-figure.


I did them up in grey (Mechanicum Standard Grey/Dawnstone/Administratum Grey) with a Nuln Oil wash and light Celestra Grey drybrush on the panel edges. I did Corax White crosses as displayed in the Polish campaign, and small 3-digit tactical numbers using decals from the 15mm Team Yankee range (they fit).


Tracks were painted Steel Legion Drab, washed Nuln Oil, and drybrushed Leadbelcher. Some light weathering with Steel Legion Drab and the models were complete.

Here's the other two tanks in the Zug.



Here's one of the Panzer Is with an old Bandai 1/48 Pzkpfw II just to show scale. I think that the base really helps even them out.
 

I painted one of the spare commanders to go in the open hatch of the Panzer II. They're nice early-war tankers wearing the "schutzmutze" protective helmet and beret.

The Pzkpfw Is are a good addition to my early-war German forces and are a tank I've always thought looks cool. Glad to have gotten these on a deal, even if they ARE 1/56...