Egyptian T-55 Tanks for "Fate Of A Nation"

Egyptian T-55 platoon in 15mm - models from Battlefront

The "Fate Of A Nation" roll-out on the painting table continues.  Here is a group of T-55s from Battlefront.  The models are 1/100 scale/15mm size.

The Battlefront T-55 model is nice, or at least a think it could be (stay tuned for more on this).  It is a little larger than the T-55 available from Khurasan, and a little smaller than the one available from Peter Pig. I prefer the size of the Battlefront model to that of Khurasan or Peter Pig, but I have to say that Khurasan's model wins out on good size, value AND really nicely cast accessories (like hatches, MGs, options on the fuel tanks etc - see Dallas' post here for some pics - they are beauties).

Decals from Battlefront

BUT, I have to say this about the Battlefront model - I generally like Battlefront a lot, but the quality of their accessories is really starting to slide.  On these tanks the hull and turret are resin.  The quality of the Battlefront resin is something I am starting to wonder about - on the BTR-152s, the hulls were breaking in the blister pack.  On these tanks, I had cracks on the decking over the treads - still visible on one of the painted models if you look.  These were cracked straight out of the packaging. This pisses me off - for what you pay Battlefront, you shouldn't have to piss around fixing that, or worrying about it.

If you look over the road wheels on the left side of the picture (the right side of the tank) you will see a chunk of deck missing - this is damaged while in the packaging, and trend I have noticed with much "Fate Of A Nation" front stuff from Battlefront - a serious piss-off considering how much you pay

On the Battlefront T-55 the cupola MG, the hatches, the fuel tanks and tracks are all cast in metal.  And the casting quality on these components is completely in the shitter. It's just crap.  At least the road wheels look OK on the treads, but overall tons of flash. The treads have appalling mold lines.  The cupola MG and fuel tanks are really, really weak. The fuel tanks have terrible seams and mold lines, and are cast in once piece  And don't tell me it is "isolated", as I picked up quite a few of these tanks and they are all showing the same problems.

Usual combo of Zandri Dust, pin washing, sponge chipping and weathering powder

These still paint up OK and one might wonder if, because of that, these little nitpicks on quality really matter? Well, they certainly matter to me. For what you pay Battlefront, there is frankly no excuse for crap quality and it is very, very disappointing.  Khurasan's tank accessories, by comparison, are almost flawless - and if a one-man band like Khurasan can have decent metal bits cast, then an org the size of Battlefront can frigging figure it out too.  It is very disappointing to see Battlefront get so many things right (the sizing, the magnets, the decals etc.) and then screw up on the quality of the parts.

An easy target from an IDF gunner

Battlefront does retain one important advantage over Khurasan - it is generally open for business, whereas Khurasan is increasingly either out of stock, or closed to catch up on orders, or both.  This is why I ended up ordering Battlefront T-55s in the first place.  It was a dumb move. Don't make the same mistake I made - avoid Battlefront, and dodge the Khurasan supply situation. Order from Peter Pig, which I should have done, and will do in the future...the Peter Pig tanks are a little heftier, but worth it for the combination of high quality and actual availability.  It makes up for the headache you get trying to figure out their web site.

You can also try Old Glory - I haven't seen them myself, but their 15mm T-55s are supposed to be excellent.  If you can figure out whether it is Old Glory 15s, Old Glory 25s, or Skytrex, or Quality Castings, or whatever the !#$#!@ it is, then good luck to you...

Detail on the cupola hatches and cupola MG is really, really poor - bottom of the barrel in my opinion. The casting of the fuel drums as a single piece is also another weak point, and you will go blind filing off the mold lines to make them presentable...

In "Fate Of A Nation", the Egyptian tank unit selections are essentially companies, and can be rolled out in company-like strength of nine or ten tanks.  We have tested "Fate Of A Nation" and based on that I can sense three T-55s would barely last one turn, and probably not even get a chance to return fire before the IDF gunners wiped them off the table.  So these three will need company.  In all, I am aiming for a total of nine tanks in the unit. 

I like to paint lenses...adds character to the model.  In actual combat operations, I think they are often covered, but that's no fun!

But will I get there soon? When it comes to focusing on a gaming project, I generally have the attention span of a two-year-old.  I have actually managed to be fairly focused on this "Fate Of A Nation" stuff for like a couple of months, which to me feels like ten years.  In this recent run I have managed to finish infantry, APCs and air support for the IDF, and infantry & APCs, more infantry & APCs, some AAA tanks and some heavy tanks for the Egyptians.  I am so close to finishing a basic force for the Egyptians - I just need to finish another six T-55s (and maybe a few other bits) and I'm there...it seems so close, but I am kind of exhausted on the Egyptian tank front for now...stay tuned for another diversion as we prepare for another visit from our good friend Curt from out west!

The Martian Front is progressing...

A long while ago I saw a Kickstarter (sorry to use a swear word, at least in Greg's opinion) for a game that really caught my eye.  The idea of the whole game and setting is based on one of my favourite books, even though neither movie made was all that great.  The game is called "All Quiet on the Martian Front" (AQotMF) and based on H.G.Wells book "War of the Worlds".

A Martian Assault Tripod with both a Heat Ray
and the dreaded Green Gas Grenades

The theory of the game is that the first invasion took place and then the Martians died out, but now 10 years later they have come back with a vengeance.  In that time frame though Earth has prepared.  We now have some weapons based on the Martian technology left behind, and have developed huge steam powered tanks and guns.  The look is steam punk / WW1 / WW2.  While it takes place in 1910 some of the weapons and guns would normally have been almost WW2 level, but due to the advances made after the first invasion the Earth is further ahead in the timeline.

Two units of infantry, a command stand, a machine gun unit,
and a squad of motorcycles.

While I got into the Kickstarter because of the figures and being too cool / goofy to pass up (or Cute in the wife's words) and thought that no matter what the rule set was like since the figures were 15mm(ish) I could use them for any rule set we liked.

As you can see, even though it is a 15mm game,
the martians are HUGE!

However as a pleasant surprise the rules supplied are actually really well done!  The rules are written by a few ex-GW employees namely Priestley, Cavatore, and Baker, which makes it maybe a bit more surprising since the current GW rules are not all that great (maybe because these guys left?).  While the rules are not hugely complicated or in-depth, they are excellent in their simplicity and allow a game to play really quickly and "feel" right, meaning it feels like I think it should fighting the Martian tripods.  

4 units of tanks, 2 units of Mark II's (each armed with a single 4" gun)
and 2 units of Mark III's (each armed with 3x 4" guns)

Now that I have two 1000 point forces painted, I will be getting the figures out for a game soon with the Fawcett crew.  Here are the rest of the images of the stuff I have painted so far, and a few pictures of a game that I played with my son to show how quickly things can go wrong...

3 Scout Tripods and 3 Assault Tripods.  Totaling almost 1200 points,
meaning these 6 models add up to 200 points more than
ALL of the Human forces in the pictures!

A Machine Gun unit and a Rough Riders Motorcycle unit.
The Motorcycle unit all have tow hooks and chains and can
attempt to immobilize the Martian Tripods making the easier to hit.

The Mark II steam tanks.

The Mark III steam tanks.

The game is based on a D10 system, almost everything Human dies in 1 shot if in the open, and the game has a move-shoot-move mechanic. The move-shoot-move allows you to pull out from cover, fire, and get back in cover before being shot at, which is critical for the humans.  It also allows the Tripods to advance at a blinding speed though, as the Assault Tripods have a 8" move and the Scouts have a 10" move. Meaning they can cover 16" or 20" respectively in a turn!

In a test game I played with my son last night he advanced the Martians against the town sweeping all the way around onto my side of the table.

 

The Tripods surrounding the town!

To react I spent several command points to bring 2 previously destroyed units of tanks back into play and launched an attack against the tripods trying to pull them away from the town.  However, the tripods are tough as nails and I only managed to damage 1 of them.  The next turn, the Martians turned around and...

The Martians turned to face the 6 tanks...

... and all were gone!
Even before all 4 tripods had finished firing! 
If I remember correctly only 3 had to shoot.

Anyway, there are the images for the new game and models, and while I may get flack from some gamers due to the cartoony nature of the tripods and the over the top steam punk nature of the tanks, I really like them :-)

Best of all, the game play so far is a lot of fast and furious fun.

I can not wait until wave 2 gets here, at which point I will have even bigger Tripods and tanks, as well as some of the really bizarre / goofy weapons like Tesla guns, Land Ironclads,  clamper tanks, mono-wheels, and more!

Oh, and I am sorry to report, that I lost the game by 1 unit to Riley...  He is of course now grounded for the rest of the summer.

Battle of Yavin - Part I

Last Thursday at Dallas' place we recreated the first part of the Battle of Yavin (from one of my favourite movies, STAR WARS), as Red Squadron strafed the Death Star prior to Gold Squadron's attack run.

We used two of the Gale Force 9 space station mats to create a 6'x3' Death Star surface. The squad sizes, respectively, were about 200 points for the Rebels;  less for the Imperials, but the 6 turbo laser turrets had no points value.

I had planned on adding Chewie in the Millenium Falcon with Han as a gunner, and Darth Vader, but I am saving them for an actual trench run game when my resin Death Star terrain comes from JR Miniatures.

Kevin and Indo each ran a trio of X-Wings led, respectively, by Luke Skywalker and Garven Dries (Red Leader). Dallas and Jim each had 4 TIE Fighters, with Dallas also running the squadron leader, Howlrunner. The Rebels had to destroy all 6 turbo laser turrets; the Imperials had to try and stop them.

The Rebels set up across the the board, to reach all the turrets.



The Imperials set up all 8 TIE fighters across from Luke.I guess that farm boy had gotten them mad...



The stats for the turbo laser turrets (taken from a GenCon trench game) were as follows:

• Pilot Skill 0
• Attack 2
• Agility 1
• Hull 3
• Shield 0
• 360 degree arc of fire 

Dallas had sourced the turrets online from an old game:



First turn, the Rebels dove into the fray and destroyed two turrets!



Luke and his buddies then flew past a turret, and shot down one of Dallas' TIE fighters.



In response, Jim and Dallas ganged up on Luke, shooting him out of the sky!



Meanwhile, Indo nailed a couple more turrets, unmolested by the Imperial fighters.



Indo moved to join the fur-ball.



Kevin and Indo's X-Wings concentrated their fire and destroyed the last of the turrets.





As Kevin later pointed out, it took the better part of 8 TIE fighters to take Luke out - allowing the Rebels to WIN the game!

Luke will probably be back for the actual Death Star trench run. I shall treat it as a "script re-write"; who the Imps THOUGHT was Luke was actually Jek Porkins. Also, Gold Leader's Y-Wings, Darth Vader, and Chewie & Han Solo in the Millennium Falcon will all be at the party.

Sedition Wars Project - First Blood!

Last weekend fellow Conscripts Byron, Kevin and I played another game of table top Sedition Wars. This was also the first time I got to play with my painted Vanguard. I have not finished my Strain, so Byron provided his for our use.

The table was set up by Byron, who used a table topper sheet from Relic Knights, and buildings from Micro Art Studio.

We played a variation of the first "Outbreak Campaign" scenario - Breach. In the first photo below, we illustrate the starting positions of forces, corpses, and objectives. Anything seen on a building roof is actually located INSIDE the building on the first floor (this photo was taken after the game was over, when we re-set everything). The buildings had removable stories and roofs, so we could fight inside them, too. The posters and such seen on the buildings Byron downloaded from the internet.



Vanguard Objective: Secure and activate the Life-Support Terminal located in the three story building located in the northwest corner of the table.

Strain Objective: Convert all the corpse counters into Strain Revenants.

Changes from the basic game: Ranges were doubled out to 8 /16 /24 inches from 4/8/12 inches. We ruled it cost 3 inches move to go up or down one story. The first stage necroforms were made cheaper, down to 1.5 points each, instead of 3.

IIRC, Kevin and I ran the Vanguard, starting with 6 basic Samaritans, and Byron ran the Strain, fielding 10 Revenants, 2 Stalkers, and a Quasimodo.



The unfortunate Vanguard Samaritans below have both been hit by acid, and the farther one infected by clouds of nano virus. They were both gone by the next turn.



Though impaled by a Stalker, the Samaritan in the photo below shot him down, then her Prophet armoured suit managed to seal the bleeding and kept her in the fight.



During the course of the game, the Vanguard gunned down around 17 Strain models (good thing they could create more, both from activated corpses, and a Necrocyst in the northeast bulding), for the loss of 4 troopers. It was a very tactical game, with cool cinematic events like a Samaritan drawing the fire of a Qusimodo on a balcony, her sacrifice allowing another Samaritan to rush into the building with the objective.

In the photo below, that Samaritan reached the Life-Support Terminal, but couldn't activate it before the Strain converted the final corpse into a Revenant.



As Byron posted on Facebook later,

"It was an awesome, tense game. I am constantly amazed at how every game we ever play of Sedition Wars comes down to a last turn win for either side. This game was a Strain win, but if I hadn't won that turn the next turn the Vanguard would have won."

***

I am busy working on both my Strain and lots of terrain for my own table. Lots of MDF buildings and cargo containers, Quonset huts, resin vehicles, and a mag-lev train will provide plenty of scope for future SW scenarios.

15mm Egyptian IS-3 Company for "Fate Of A Nation"

IS-3 Company for "Fate Of A Nation"

I note with a casual glance at the calendar that this time of year is often referred to by many as "summer".  I too can remember these alleged "summers" growing up here in Winnipeg. They were brief, even joyous respites from the hellish siege-like conditions of a prairie winter, typically lasting around three months.  During these "summers", my paint production would plummet because, well, you want to be outside riding a bike, walking, visiting, gardening, BBQ ing, etc. But Mother Nature, following up on the worst winter in over 100 years, is continuing her "see you next Tuesday" mission statement for 2014, obliterating the long weekend in a blast of wind and endless rain.  (We are relatively lucky here in Winnipeg, sheltering behind flood defences that are marvels of engineering - my thoughts to any out there affected, particularly my friends in Westman and Saskatchewan, who may not be so lucky when it comes to flooding).

I used the bristles from a hair brush to represent antennas

Since there is no summer in 2014, I can keep painting during the rain.  So here is an Egyptian IS-3 heavy tank company for "Fate Of A Nation" - six tanks strong, all models from Battlefront. I had painted a test model of this tank back in early June, and finished the balance off over the weekend.

These are hefty models - really big, scary tanks (or scary looking, at least)

As I said before, I love the look of this tank.  It seems like it should be scary as hell on the battlefield, although by 1967 it sounds like there were fading in terms of their impact. I thought six tanks would be a good size for a company - on paper I think a Soviet-style tank company is like nine to 11 tanks, but given the mechanical issues of these old beasts, getting six into action is pretty good!

Top view, showing some of the weathering on the deck and top of the turret

These six tanks will form a single selection for the Egyptians in "Fate Of A Nation" - following the Soviet model where the player is selecting companies instead of platoons.  I have never used them in a Flames of War game, so I have no idea how well they will hold up. My expectation is that they will serve as target practice for the well-trained IDF tankers and air force pilots...but they will look good before they blow up!

Another top view of the vehicles

My Egyptians now have this tank company, a mechanized infantry company (also here and here) and a section of ZSU-57-2 AAA tanks.  But this is still not enough to round out the basic force selection on the "Fate Of A Nation" org chart - a second tank company it required. So stay tuned for more tanks (and more, and more...)

Ready to face the IDF!

And I sincerely hope that wherever you might be reading this, you at least get a summer, or failing that, are not facing damage (or worse) from the scary weather than can accompany the season.  Meantime, the North American prairie climate can basically just go f*ck itself with a rusty chainsaw...

Egyptian Mechanized Infantry HQ - 15mm Fate Of A Nation

Egyptian Mech Infantry company command

Some more 15mm Egyptian kit off the painting line - this is the command element for the Egyptian Mechanized Infantry Company.  There is a command stand and some support weapon teams that are optional upgrades for the unit.

Recoilless rifle team for the Egyptians

Egyptian mechanized infantry company commander - likely one of the worst jobs available in 1967...

There are two LMG teams - I believe they are meant to be RPDs.  I find the assortment of Cold War-era LMGs very confusing - I thought the RPD had a circular magazine, but perhaps it could be belt-fed too? Hopefully someone more knowledgeable fill me in…

LMG team for the Egyptians

Another view of the weapon teams

There is also a single BTR-152 APC for these fellows to cruise around in - you can see this model was damaged, a common problem I have found with these models from Battlefront.  I have painted about five of these so far, and four or them were broken in the package in this way, with a cracked section on the side walls of the vehicle.

Note the chip in the side of the vehicle - I tried to dress it up as battle damage, but it is the result of poor packaging by Battlefront

There are also two recoilless rifle teams, 82mm calibre ("B-40", I believe). All together these four teams can join the mechanized infantry platoon, an enormous collection of bases and vehicles that occupy just a single selection on the Egyptian force organization chart for "Fate Of A Nation"!

This almost wraps it for the Egyptian infantry for now…on to the tanks…

Commonwealth Air Training Plan Museum Visit

A couple of weeks ago Jen and I made the 2 1/2 hour drive out to Brandon for PrairieCon, where I played in the fun games put on by fellow Conscripts Greg and Dallas. Saturday evening we were joined by Kim, Byron, Anne and Chris at my favourite Brandon watering hole/restaurant, The Dock on Princess. Yum!

On Sunday, Jen and I went to the Commonwealth Air Training Plan Museum, located by the Brandon airport. We'd been meaning to go for some time, and this was a great opportunity. During World War Two the British  Commonwealth Air Training Plan trained 131,533 Allied pilots and aircrew at 231 locations all across Canada. Brandon was a major centre for this effort.

There are several dioramas at the museum depicting day to day operations...













...including prohibited activities such as stunt flying!



There were uniforms on display...



...including this heated flying suit that looks like teddy bear pajamas!



There were some exhibits regarding women's role in the war effort.









The heart of the collection are the many aircraft located in the hanger portion of the building, some of which are illustrated below.







The father of our friend Samantha trained as an air gunner in a Bristol Bolingbroke (a license built copy of the Blenheim bomber), but the war ended before he was posted overseas.

















There were interesting exhibits such as CO2 based firefighting equipment...



...and war booty seized from the Japanese.



The museum is in the midst of restoring several aircraft, including a Hawker Hurricane.









The Fairey Battle in the workshop is interesting. There exist no plans, but the museum is working with a museum in Australia who are undertaking a similar project. Note both the R/C model (which the pile of junk behind it will eventually look like)...



...and the more detailed model fuselage covered in pencil marks.



The memorial of the fallen will be completed in the fall of 2014.



I urge anyone in the neighbourhood to drop by, and to consider making a donation to the Memorial Project.