The Conscripts are not shy of flyer models for 25-28mm scale - for moderns, we have a Hind helicopter and a Tornado fighter. For SpaceKrieg there is the devestating FuturKom flyer. For WW2, I think there is a Spitfire, Me-109, Yak and some French fighter too.
The flyers are not often seen at our 40k games, however. Dave V's awesome Eldar Nightwing fighter is really the only mainline 40k flyer to have seen action on our gaming tables. The 40k flyer models are tricky to build, hard to mount and expensive to get in the first place. There is already a lot of other stuff to pack into a 1000 point or 1500 point game, so we can generally get by without it.
But with our group, escalation is always a threat (which is great, because it makes us collect more stuff). With the recent appearance of the
Da Red Barun, my 40k Rogue Trader Guard will now have to put up with what will surely be devestating, if potentially erratic, strafing runs. Who knows what Dallas will add next for his Tyranids or Nurgle renegades? The risk of fighter/bomber attack was getting too risky for my 40k Imperial Guard armoured column, so I reached into the old "what-was-I-thinking-when-I-ordered-this-crap-six-years-ago?" pile and threw together my Hydra AA tank.
Here are a few pictures, mixed with some editorial:
I have ranted before about Forge World "quality". This conversion kit - acquired at the same time as the alternate Basilisk gun shield - arrived in terrible condition. The cannons were warped, and I didn't think hot water was going to do the job. I also could not find a key part - the deck piece that would hold the turret! It had arrived with the kit, but somehow got lost when we moved to the new house four years ago. And so this went un-built. I figured I might just use the turret for an emplacement or something one day.
About a month ago, the missing piece suddenly turned up during a round of bits rummaging. I was back in business! I just had to figure out the barrels...
Hot water was not doing the trick with the warped cannon barrels, so I had to step it up to the ole' hair dryer. Lucky for me Linda doesn't even flinch when I ask "Where is your hair dryer?" while holding a model kit. I managed to mostly straighten out the damn guns, and I was set.
Or not. Even after all that the frustration was only just starting. Lucky for me I found some curses that seemed to help the superglue hold even stronger. The pieces barely fit the Chimera model kit. There is a narrow but long gap on the decking that I managed to mostly cover only with the help of the track guards, but you can still see part of it...hopefully the dark colours will mostly mask it.
The frustration extended to the painting phase. With the Forge World resin models, I use two coats as a base - Tremclad primer, and then Krylon flat black. I'm not sure what went wrong, but on the resin deck piece, the primer stuck fine, but the Krylon sort of krinkled, like a lizard's skin. I mitigated this with "strategic" dryburshing, and most of this happened on the deck piece, which is covered by the big quad gun turret, so fortunately it is not much of an issue.
The new tank received the blue coat, decals and weathering/rusting last night. Now my Imperial Guardsmen can get a bit of cover from air attack. Also, like all AA tanks, the Hydra looks to be great fun against ground targets too. As a newly painted miniature, it will be doomed in its first game, but after that I hope it will claim many enemy flyers - not mention chewing up a few Tyranids on the ground!
With this, my Imperial Guard revamp is pretty close to done. I think I will update the decals on my "blue" Valkyrie, and may edit a few other things on some models before putting these guys down for now, but it's been fun to revamp some old stuff and finish some way, way overdue pending projects.
Here is a photo of the vehicle with the owner, Derk Derrin, and me in front of the Legislature during the Camerons' 100th Anniversary celebration. I managed to get a ride in the vehicle but because it was on the road surface, we didn't really get up to speed. Metal tracks and asphalt/concrete don't mix well.
Here is a pic of my cluttered work area. In addition to the photos of Derk's carrier, I was also able to find some pdf files of Canadian vehicle markings on the internet. This proved very useful for producing the tactical symbols for marking the vehicle. In order to paint the crew men, I glued them to Popsicle sticks which makes it easier to handle the figures. The driver and Bren gunner castings are only from the waist up, while the crew that sit in the back are cast from the shins up.
It took me a while to get the colour somewhere close to correct. Canadian vehicles were painted a bronze olive colour and I haven't been able to find anything close that is pre-mixed. I do most of my painting with water-based acrylics from the craft store. A 50/50 mixture of FolkArt 449 Olive Green and 945 Maple Syrup seems to come very close. The vehicles with the crooked stars are the original Battle Honors universal carriers, which are inferior to the BAM resin castings. They are about 10% too wide and 5% too short (most of the missing length being forward of the driver's compartment).
Here is the completed carrier platoon with all the crew inside and vehicle markings in place. To make the markings, I scanned an image of the symbols and shrunk it to size. I then printed enough off on my laser printer, cut them out with scissors, and glued them on with Weldbond glue. I put a black '5' on a yellow circle on the front right fender (bridge weight rating) and white '68' on maroon square, as well as the a yellow maple leaf on a blue rectangle on both front and back of the vehicle. Not as perfect as decals, but it was a cheap way of doing the markings for the Camerons of Canada.
Here is another view from a different angle showing the unit and divisional markings. I am counting these as 20 points towards my personal painting objective for 2011.
