More Random WW2 Painting - 20mm Soviets

Some random 20mm WW2 Soviets.

I haven't posted in a while, but I have been managing to keep the paint brushes going.  For some weeks now I have been really stuck into WW2 painting subjects - this isn't so unusual overall, as I really enjoy gaming the period - but given that interest, output on that topic has been extremely sparse over the past few years.  I feel like I have been trying to make up for that in the past six weeks...and here are some more products from those efforts - some 20mm WW2 Russians.

As with the random 15mm Germans I posted earlier in the month, these models were all sitting in a big pile in a box (see photo), a thing that passes for "organization" when it comes to my hobby hoard.  I was probably "just about to paint" these back in 2015 or 2016 or something, but then tossed them suddenly away as my squirrel-like attention span was swept up into some other project.

Part of my WW2 "Pile Of Shame" - a mix of 15mm and 20mm figures and vehicles. I'm trying to clear up at least SOME of this backlog!

One thing when I move on to something and leave a project behind is that I often forget what paints I used and in which combination I used them.  So these were kind of "test models" to see if I could get back on the Soviet WW2 wagon.

A BA-64 armoured car (from SHQ) and a messenger (from PSC).

The wee BA-64 (sitting primed on my desk for years!) is an all-metal model from SHQ Miniatures. I think the scale of the vehicle is probably more 1/76 than 1/72, but I'm not 100% certain, and at any rate it is hard to tell as the BA-64 is such a wee vehicle! This little vehicle will help with scouting and some light fire support on my gaming tables.

The Russian uniform came out a bit too dark, but I was happy with the green on the armoured car.

There is also a single infantry model - this is a 1/72 plastic figure from the Plastic Soldier Company. He is not armed, but can serve as a dispatch/messenger, which can have a specific application in games like "Battlegroup" or just serve as an objective in general in many of the other systems we play.

I was trying to figure out the mix of colours I had previously used for the Russian khaki...this came out too dark.  I think I have the right colours, but not the right mix.  I'll need to keep experimenting - and write it down after I get it right!!!

T-34/85s from PSC - prepared to crush the fascists!

The T-34s are 1/72 plastic models also from the Plastic Soldier Company.  PSC had a sale a few years ago, and I must have really stocked up, because I found I have like four boxes of these things! Oh well, in just about any scale of WW2 Eastern Front game, you can always use a lot of T-34s...

I rough my tanks up a lot...maybe too much, but I like the battle-worn look.  It seems right for the Eastern Front!

The PSC models give me heartburn at times - why, oh why, are the tracks in multiple pieces?!?! But I suspect that's just me. Most people (any non-bot reading this) will not have the same challenges I routinely encounter...overall, these are EXCELLENT kits, a great value and a great way to build up a big Soviet WW2 armoured force. If you look closely, you will see I mucked up on the tracks...but, that's me - with some common sense, you'll avoid those issues easily.

And hey, paint them and muck'em up, and they're good to go!

As a bonus, these models come with two turrets, so you can use them for the earlier, more classic T-34/76 variant.  I have not painted the 76mm turrets yet, as my interests are much more late war than mid-war for now.

Curt will often refer to painting in this scale as "God's Own Scale". We all laugh - of course, all of us have our preferences for scales/periods etc - but he does have a point - I find painting the WW2 figures in this scale very, very fun! While my 15mm collection is much larger, my 20mm WW2 collection is growing slowly-but-surely.  These were great fun, and I hope to do more during the approaching Analogue Hobbies Painting Challenge. 

Painting Challenge Submission 11 - Cold War Support Elements

NATO support vehicles hold the Warsaw Pact back from strategically vital parts of...my kitchen...models from Battlefront and Armies Army

After five consecutive weeks featuring submissions of 15mm Cold-War-Gone-Hot subjects, I really thought I was going to switch to painting something different - but the switch didn't stick. I started thinking to myself "well, what about one or two support elements to, you know, 'round out' the work I have already completed..." and such are the debris-strewn pathways of my hobby mind that I put down that other stuff and went back to the 15mm stuff - just can't seem to quit the Cold War!


Subjects from two NATO nations today - some support elements for my 15mm 1980s Canadians, and some tank-hunting helicopters for my 1980s West Germans.


Since it has been a few weeks since we last visited the Bundeswehr, let's start with the helicopters. These are BO-105s, multi-part 1/100 scale plastic kits from Battlefront, part of their extremely comprehensive lineup of figures for the 1980s West Germans in their "Team Yankee" game.

BO-105 tank hunting helicopters for the Bundeswehr

Where the Germans have some fine form when it comes to battle tanks, these BO-105s don't, shall we say, give off quite the same "menacing" vibe as, say, the utterly terrifying Soviet "Hinds".

Instead, the BO-105 has a kind of practical, workmanlike "well, anything is dangerous once you attach anti-tank missiles to it" sort of aura.

TOW anti-tank missiles are the killer armament of these helicopters...they are out to hunt tanks

With the Warsaw Pact and its 3 billion tanks facing you down, you do need to have as many economical anti-tank options as possible to back up your ultra-sexy Leopards! The BO-105 is a fine tank-hunting platform, capable of moving quickly, hugging available ground cover and obstructions to "pop up" and pick off enemy armoured targets with guided anti-tank missiles.

While plastic has its issues, bravo to Battlefront for bringing these models out..they'll be fun on the table!

Dallas already has a solid collection of West German forces, including a pair of these helicopters already, so this painting is not necessarily super-useful in terms of our overall group's collection. But it was fun to get these finished. In our "Team Yankee" games the helicopters seldom survive, but their approach is always dramatic and tense :) perhaps these extra helicopters can be involved at some point to help the West Germans hold out in the face of large amounts of Soviet AAA fire.

OK - moving back to the Canadians, here are a couple of support elements to "round out" my initial battlegroup from the 4th Canadian Mechanized Brigade Group.

M113 "Lynx" Recon vehicles for the Canadian Forces

There are two "Lynx" recon vehicles - a variant of the M113 APC that is a little sportier-looking than the average M113.  The Canadian Forces used the Lynx for various scouting, security and other purposes.  These models are from Armies Army - Keith, being a great guy, tossed them in as freebies after I ordered a squadron of Leopard C1s - "they will look great with your tank column" he said, and he was right!  While I thoroughly dislike the M113 in general, the Lynx at least has a sporty little look to it, and the turret-style bracket mount for the .50 cal is pretty neat too.

.50cal MGs in the turret-style mounting, and a little .30cal on the back for some extra fire support in the event of a sticky situation while out scouting...

Big "thank you" to Keith for tossing these in with my Leopard C1 squadron...they will round out my forces nicely!

As I mentioned in a previous posting, wargamers can seldom relate to recon assets the way real commanders in the field would.  These vehicles would be out ahead of the Leopard C1s, reporting back and providing vital intelligence as the battle was joined.  With an actual battle underway, as experienced on our tabletop, these poor Lynx vehicles won't last any longer than the Soviet BRDMs or other equivalents, but at least my Canadians will have some recon support, and the additional power of a couple of .50 cals will back up the infantry platoon.

M150s - APCs mounting TOW anti-tank missile launchers

The other two vehicles are M150s...these are M113 APC with a mount for a TOW guided-anti-tank missile launcher. High-end anti-tank hitting power is at a premium in any NATO force, but particularly so for the Canadians, who may have to tangle with Soviet tanks while the Leopard C1s of the Royal Canadian Dragoons are busy elsewhere.  These M150s provide the Canadian mechanized infantry elements with some theoretical heavy anti-tank power with quite a long potential engagement range.

Clever casting work by Armies Army to allow the convenient mounting of a TOW launcher and gunner on the M113s

Some oversize decals from a 1/87 sheet to give some good Canadian flavour, eh?

Much fiction related to war with the Warsaw Pact (and thank goodness it is fiction!) features weapons like the TOW sniping Soviet tanks with clockwork precision - although it should be noted that some accounts, like Kenneth Macksey's fantastic "First Clash", are much more sanguine about such things. I am personally skeptical of the projected effectiveness of weapons like the TOW under real battlefield conditions (it would be no small thing to steer a missile towards a tank in the middle of the smoke, falling artillery shells and other horrors and utter chaos of a Cold-War-Gone-Hot battlefield, I expect), but I do really like the models. They add some additional flavour to my Canadian battlegroup and the infantry platoon will no doubt appreciate the support!

I popped the commander out to show a command vehicle, but let's assume the firing pose is for propaganda purposes only - I hope they wouldn't fire the missile while the poor driver was popped out of the hatch, right in front of the barrel!

The M150s are also from Armies Army (now available from Plastic Soldier Company).  As I said before, Keith did an incredible job bringing a very complete collection to market - I love when sculptors do that! Go buy this stuff and support these guys!!


So six vehicles in 15mm were good for another 36 points toward my target. The steady march toward 1000 points of painting continues...

Painting Challenge Submission 10 - More Canadian Cold War Stuff

More Canadian armour for the Cold War - 1/100 models from "Armies Army"

Another AHPC submission to catch folks up on. The theme is no surprise at all - continuing to round out the basic elements of my 15mm Cold War-era Canadian troops for "Team Yankee".


My prior submission had included Canadian Cold War-era infantry, but for the 1980s the infantry need a ride to battle - otherwise they would be stuck on the table while their enemies zoomed around them! For the Canadian forces of the mid-1980s in Europe this ride would have come in the form of the M113 armoured personnel carrier. My Canadian foot-sloggers were lacking in APCs, so the M113s were duly slotted into the painting lineup so the fellows could get a lift on the gaming table.

Ugh. M113s. So, so lame...but at least the large decals on the front add a bit of clear character...

We all have painting subjects we dislike, but perhaps can't avoid due to the circumstances of the given period or setting, don't we? Well, for me, the M113 is one such subject.  Where painting NATO tanks tends to be a whole lot of fun, painting an M113 is like throwing some acrylic paint on a frozen turd. An unlovely box on treads, the M113 is utterly devoid of character, charm, personality or the slightest hint of fun. No turret. No cool vents.  You look at these things and wonder what the point is? They must have had some serious up-sides, or useful aspects from the perspective of actual military users (I mean, hey, that .50 cal surely comes in handy for fire support purposes!) but on the hobby side, they are not a model I enjoy working with.

Commander popped out of the hatch to a) represent the platoon commander's track and b) add some character to the otherwise un-inspiring silhouette of the M113 APC

Besides - Canada purchased cool tanks from Germany - why not purchase their awesome infantry fighting vehicles too? Really, anything that you will drive in a war - let's just use common sense, and buy from Germany! Sadly, no...you can't avoid the M113 if you want to paint Cold War forces from Canada. The stupid M113 was the core APC for the main mechanized infantry elements of the 4th Canadian Mechanized Brigade Group, and as such, they would have to be painted if I wanted to reflect the infantry in my tabletop forces...so here we are...

These models are from "Armies Army" (now available from Plastic Soldier Company).  They are mixed resin and metal kits.  While my love for Armies Army is un-diminished, and I salute Keith's valiant and amazing efforts to bring Cold War Canadians to life in 15mm, I must acknowledge that his M113s were...tricky...you won't have to look hard to spot the gaps between the tread assemblies and the fenders.  In this case I must sadly report that Battlefront's plastic M113s are probably the better way to go...the Battlefront models are multi-part plastic, with all of the associated frustration this can entail, but they are more precise in the end.

The camouflage Canada used on these vehicles was somewhat unique as well, and not the most fun to paint. I used a mix of decals from Armies Army as well as a useful 1/87 sheet for things like Canadian flags and license-plates.  The 1/87 decals are oversize for the scale, but they help the nationality stand out a bit more on the table, and add just a touch of character to the boxes-with-treads.  A huge thanks to Mike F for helping me track down the 1/87 decals!

1/100 Leopard C1 from Armies Army - with the "1B" marking I think he is the "Battle Captain" from "A" Squadron...although there is a high chance I'm wrong about that...anyway, popped out commander and blue flowers to indicate the MBT is part of the Squadron command troop.

Leopard C1 with dozer blade attached on the front - an excellent little touch from Armies Army!! It will have no impact in game terms, just a cool thing to include from a completeness perspective...

To wash the terrible flavour of painting stupid M113s out of my mouth, I finished off another pair of Leopard C1s as well.  Positively refreshing!  These are both from the excellent Armies Army, and another element of Keith's utterly complete rendering of these troops can be glimpsed by the presence of a dozer blade mounted to one of the Leopards in the photos.  One Leopard C1 in each squadron had a dozer blade, useful for various battlefield engineering tasks (in particular helping to prepare hull-down firing positions for the other Leopards).  Full marks again to Armies Army for bringing out such a complete collection of models and figures!!!

Canadian armoured squadron, ready to roll out!

And so I have the very basic elements of a battlegroup from 4CMBG in place for "Team Yankee" gaming - a squadron of Leopard C1s and an attached mechanized infantry platoon from either the RCR or the Vandoos. All in this has been just about what...five or six weeks of painting? Not too bad!  Here is a photo of the battlegroup to date:

Basic battlegroup from 4CMBG - Leopard C1 squadron with attached infantry support - ready to stand fast in the NATO lines!

Whatever I think of the M113s, at least these fellows will have a ride to take them around the battlefield!

Points wise, this submission was worth another 36 points towards my goal of 1000 points of painting.  The goal is getting closer, a bit every week! Hope to be there by the end of the Challenge in March.

And now Mike F just "just" needs to do a platoon of foot troops based for this game as well,  since he already has a bunch of M113s and other vehicles painted, we can have quite the force of Canadians on our "Team Yankee" tables!

Painting Challenge Submission Nine - Cold War Canadian Infantry, and Bonus Leopard C1

More Cold War Canadian troops in 15mm!

Hello folks! It's been a busy couple of weeks with with 1-to-1 scale activities, such as a nice vacation, and then a bunch more work.  These are all good "problems" of course, but it has been keeping me away from the brushes or even staying updated with progress in the 8th edition of AHPC! To help get back in the saddle, here is an update - my ninth submission (posted two weeks ago), with a continuing 15mm Cold War flavour.  This is an infantry platoon of Cold War-era Canadian troops in 15mm, with a bonus additional Leopard C1 tank.

Platoon command stand - officer pointing, radio operator beside him

Tanks are a tonne of fun, of course - in the case of the Leopard C1, about 40 tonnes or so of fun! But it is the hard-slogging, ground-pounding, digging in-and-assaulting-and-hunkering down infantry that take the ground and hold it at the end of the day.  The Canadian Battlegroups of the 1980s would be counting on their Leopard C1s, but the mechanized infantry were the heart of the effort - troops from the Royal Canadian Regiment and the Vandoos.  So I wanted to add some infantry to round out my preliminary Canadian "Team Yankee" forces - plus they paint super-fast, which is a nice bonus!

Here is a bit of a retro item - a .30cal MMG in support of the platoon

The infantry figures are from "Armies Army" (now part of the excellent Plastic Soldier Company).  And they are a treat! Just wonderful castings, made from metal, as all proper wargames figures should be.  They are sporting Canadian infantry weapons from the 1980s cold-war era - FN rifles, Carl Gustav anti-tank weapons, and support from a .30 cal MMG and a 60mm mortar.  The latter two elements are sort of retro-classic weapons, but it seems the Canadian Forces tended to make use of older weapons for quite a while longer than some other NATO armies.

Three sections of infantry - and the 60mm mortar is on the right at the front - poor chap, has to carry it by himself it appears :)

As appropriate for Canadians, the infantry are sporting colder-weather jackets - an excellent touch, in my opinion! I can't say enough good things about these castings.  I purchased an entire companies' worth of the troops, and look forward to painting them all up.  Huge kudos to Keith at Army's Army for making these a reality - for a nerd like me, it is exciting to have the chance to collect these lads and game with them.

View showing some of the webbing - note the Carl Gustav AT weapon on the one base in the foreground

Of course, these chaps will need some M113s to ride around in - those will hopefully appear on the painting table soon.

Another Leopard C1 - this one from the Plastic Soldier Company

The tank model is a 1/100 plastic Leopard C1 from Plastic Soldier Company, with an FN MAG from Peter Pig swapped into the cupola MG.   This gives me 10 Leopard C1s...on my way to having a whole squadron for the gaming table. These fellows have already seen some tabletop action - with many of the recently-painted tanks suffering the fate of all newly-painted models - it was a rough "win" for the Royal Canadian Dragoons!

More Canucks ready to chip in for NATO

Points-wise this managed to gather another 64 points toward my total goal of 1000...slowly but surely, I'm closing in.

I'll leave you with a photo from Palm Desert, California, USA - we did a six-mile hike in Joshua Tree National Park a couple of weeks ago! The landscape was beautiful and surreal...so glad to have a chance to visit...

The Palm Oasis in Joshua Tree National Park, California, USA

So now that I am back home a little more consistently, I hope to have the paint brushes firing up once again - stay tuned for more!

Painting Challenge Submission Seven - Leopard C1s for "Team Yankee"

Canadian Leopard C1s in 1/100 scale for "Team Yankee"

My pent-up interest in Cold War armour has been well and truly unleashed in this edition of the Analogue Hobbies Painting Challenge. I haven't painted this many 15mm tanks in several years, and it has been a lot of fun so far. I love tanks! After a couple of weeks of working up my West German Bundeswehr forces, we turn today to another NATO member - my home team, the Canadians!

In this I follow the trail blazed by Conscript Mike F.  A search through dusty old posts at the side of this blog will reveal his exhaustive efforts to put together a force of 1980s-era Canadian Forces in 15mm.  He started with Leopard 1s, and then did head swaps for infantry! Now THAT is commitment :)  Mike completed this project back in 2013, but it is still awesome, and as Battlefront's "Team Yankee" game arrived, these efforts were often in the back of my mind - I really wanted to get some Canadians into a game of "Team Yankee".

During most of the Cold War, and particularly the mid-80s period envisioned by the game "Team Yankee",  Canada's contribution to the forward-deployed land defences of West Germany was the 4th Canadian Mechanized Brigade Group. They were based in the Central Front zone and were intended to act as a reserve for the US VII Corps or German II Corps. While the 4th CMBG was mostly a mechanized formation, with stoutinfantry of the Royal Canadian Regiment and the "Vandoos" trooping around in M113 APCs, the cutting edge were the Leopard C1s of the Royal Canadian Dragoons.

RCD FTW!!

The Canadian contingent was not a large force overall compared to the other NATO elements in 1980s Western Europe, but it was well-trained and would have given a solid performance if called on, I have no doubt.  As I have mentioned in other Cold-War-Gone-Hot postings, thank goodness (at so many levels) that this is all fictional, as several friends, including a few Fawcett Avenue Conscripts, served in and around these formations...

Leopard C1 troop - 1/100 models from "Armies Army"

In NATO reserve, the Canadians could expect to be waiting for a Soviet breakthrough, and be sent to block it. NATO commanders would count on them them to stop and hold these Warsaw Pact elements for 24, 48 hours or longer, while other NATO formations rallied and counter-attacked.  The Leopard C1s of the Royal Canadian Dragoons would have been key to these operational expectations. So for me any "Team Yankee" games with Canadians would start with getting models to represent the Leopard C1s.

Armies Army models - showing the lovely casting of the low-light TV system over the mantlet, and the FN MAG on the cupola

The Leopard 1 was a widely exported tank, and trying to make sense of all the countless small variations that seem to emerge on the different versions used by different nations (Canada, Belgium, Denmark, Australia, Italy, Brazil, and more) gives one a headache. And while I'm not much of a rivet-counter (or so I like to believe, at least), I still get bugged by little details, small things here and there that still stand out on even small model.  Get them right, and bang, it all "looks" right!  Get them wrong and it's...well, it's OK...but it just bugs me...

Leopard C1 in 1/100 scale from Plastic Soldier Company - the FN MAG on the cupola is from Peter Pig; the decals on this tank are 1/87 - and the Canadian flag on the front plate is my own useful identifier for tabletop purposes...I don't think they actually had a big marking on the front of the tanks like that...

In the case of the Leopard C1s, two such "little details" nagged at me.  One was the targeting system mounting on the main gun mantlet - a container for a low-light TV and other gadgetry designed to help the gunners engage targets in darkness. On the Bundeswehr Leopard 1s this is a box-shaped gadget, but on the Canadian C1s it is a sort-of rounded cage. Why? Well, the Canadians had a different camera/targeting system. The other "little detail" is the cupola MG.  On the Bundeswehr tanks this is an MG3 (a.k.a. MG42), but the Canadian Forces had a 7.62mm MG, I think it was the FN MAG, mounted up there.  Even in a very small scale like 1/100, the MG3 has such an iconic silhouette that the vehicle looks German.

Should either of these things really matter on a 1/100 scale model of a tank? Well, no...but...yes! What is wrong with me?  I'm such a DORK.

Another view of the PSC models...the targeting camera is not as detail as it is on the Armies Army model, but still great and well done to PSC for thinking of those sorts of "little things"...

The popularity of the period and scale sparked by the entry of a large player like Battlefront has inspired the creativity of some of the smaller figure companies to step up and offer more models. Plastic Soldier Company issued a box of plastic Leopard 1s that could be built as the "C1" variant used by the Canadian Forces. "Armies Army", another fringe-ish producer of cool 15mm figures did even more, producing, in late 2017, a full range of Canadian infantry, Leopard C1s, M113s, M150s (APCs with a TOW launcher) and even the Lynx recon tracks. WOW. So of course I ordered a bunch of everything...so here we go...naturally the Leopards were first under the brush...

There are nine tanks in the photos here - three are from the Plastic Soldier Company, and the balance are from Armies Army.  The Plastic Soldier Company models are a treat to assemble, and they have options for the little targeting camera on the mantlet to suit the Canadian variant, which is just great for a nutter like me! Only downside if the cupola MG is still the German MG3, and that is the only option on the sprue.  I worked around that by swapping in some FN MAGs from a pack of Peter Pig 1/100 IDF Centurion Shots that I haven't painted yet (long-abandoned Lebanon project - don't ask).


The Armies Army vehicles are a mix of resin and metal parts. I love that the Armies Army variant comes with all of the proper accessories - the FN MAG for the cupola, a well-sculpted thermal jacket on the main gun barrel, etc.  PLUS he sells you tons of stowage, something I will add more on later. But they are slightly trickier to assemble - you don't get the razor-sharp precision you do with the plastic kits from PSC. With the treads in particular there were a few challenges...but in all, the Armies Army effort is just so cool because it is so utterly complete - EVERYTHING you could want - well aligned to the mind of a wargaming nutter like me!


AND, major bonus, you can get DECALS! Yes, the little things that really finish off the models! The downside is that, other than the maple leaf on the turret, the decals are hard to see, as they are small and the black stencils don't show well on the green.  Or, they might show in the photos if I ever purchase a light box - but, if you ever see me buying one of those, you'll know I have finally painted every single figure and model I ever want to paint and have moved on to less important things...but anyway...

Ready to roll out against the Warsaw Pact, eh?

It's just as good that most of the symbols don't show up too much...the Canadian forces used a series of call signs, numbers, letters and symbols on their vehicles that would leave ancient Byzantine commanders asking "Are you sure? Seems a touch complicated..." Mostly I just wanted to be sure the Maple Leaf showed up on the tabletop - and it does!  One of the tanks you see here does have larger decals than the others - these are from a 1/87 scale decal sheet, while the rest are from Armies Army 1/100 decals.  I reason the one with the larger decals is just an extreme patriot of some sort, and I'll use it as a Squadron commander or something.

Keen to try any of these models yourself? I would say "go nuts" with either provider, but to further confuse things (so appropriate for a post about Leopard 1s and Canadians), Plastic Soldier Company appears to have acquired Armies Army...all involved are excellent folks to deal with, and it looks like PSC will sell the Armies Army range.  Should be good news long term, and you can take your pick of Leopard 1 models!

Furthermore, Battlefront itself has hinted at providing figures for Canadians later this year, part of a rules expansion to be called "Free Nations" or something similar...but if you are like me, and you don't like waiting, go visit PSC right now!

Anyway, these tanks joined Mike's established collection to receive a baptism of fire on the gaming table last night...and as newly-painted models...well, you know how that goes...stay tuned for a separate blog post about that...

Big thanks to Mike F for the inspiration, assistance with decals and sources of information on the 4th CMBG. Also want to give a shout-out to Stanley Martens and his similar efforts (check them out here) - very inspiring stuff Stanley, and your posts were very, very helpful! I have a few more models to finish to round out the Squadron, and from there it will be on to some Canadian infantry...stay tuned!

AHPC Submission Six - More Bundeswehr Armour (plus "Flight")

More Bundeswehr armour in 15mm to reinforce the NATO lines!

My 15mm Cold War armour efforts continue to have a lot of momentum. Once I started to tackle my unpainted collection of Bundeswehr armour in 1/100 scale from Battlefront, I felt more and more that I didn't want to stop until I got through almost all of the lot I had accumulated over the prior 18 months. And so, here is yet more Bundeswehr armour in 15mm.  The models are nearly all from Battlefront, with one exception, which you will see more on below.

As before, these are painted in my best approximation of the West German three-colour camouflage scheme.  Templates were used to apply the paint to these vehicles in depots, and so I tried my best to have the camouflage pattern on each vehicle to be generally similar. Let's take a look at some of the different AFVs in this batch.

Luchs wheeled armoured recon vehicles - 1/100 models from Battlefront

Up first are the Spähpanzer Luchs, 8-wheeled armoured reconvehicles.  As you can imagine, they are engineered for speed, moving rapidly about to keep an eye on the various movements of their Warsaw Pact opponents.

Certainly looks like a sporty ride...

In the event of a tussle with the enemy they carry a turret-mounted 20mm cannon, sufficient to deal with opposing recon elements they might encounter.  The vehicles are lightly armoured, however (as you might expect) and so will not last long against any direct fire from enemy tanks or missiles.

Well-executed mixed resin and metal kits from Battlefront

Many rules try to give players reasons to use recon-themed elements like this in their games, and "Team Yankee" is no exception, but I find the games we really like to play are ones where a battle develops, and given that the players have a birds' eye view of the forces on the table, it is very hard to make recon elements as important to wargamers as they are to actual commanders in the real battlefield. In a real conflict, vehicles like the Luchs would be providing essential information to panzer and panzer grenadier
commanders - info they would be very vulnerable without.  

On a wargame table, you hope light vehicles like these knock out something useful before they are hit by a 125mm tank round fired in anger by Soviet players who were unable to successfully target anything larger on the NATO side...

Despite these issues, I like how cool these models look, and it's fun to try and put together different kinds of forces to give some variety to the gaming scenarios we can set up.

A zug of Leopard 1 tanks - models from Battlefront

Up next we have some West German MBTs – these Leopard 1s.  By the time of the (thankfully) fictional battles envisioned by the game “Team Yankee”, the Leopard 1s had moved out of main frontline service, replaced by the heavier Leopard 2s. The Leopard 1s moved in heavy-support role for the scouting elements of the panzer and panzer grenadier formations instead (and I expect still equipped some reserve panzer battalions). 

Love the look of these German tanks! The Leopard 1 is another classic Cold War vehicle

The kits from Battlefront are a treat to work with - phew!

The Leopard 1 tanks are fast (you know, for tanks), and with a well-designed 105mm main gun, they can certainly dish out severe punishment to Warsaw Pact armour.  Plus, they just LOOK so cool – the main battle tank answer to a fine-looking German sports car! But their armour cannot be counted on to absorb the 125mm return fire of the Soviet side. The commanders and crews of these vehicles need to keep moving and be very careful when and how they engage the enemy.


So often NATO players are content to see their small number of scary tanks blast away, but they will need to be a little more clever when using vehicles like the Leopard 1.

A 15mm Leopard 1 from the Plastic Soldier Company - an excellent kit! Note, however, the crew are still from Battlefront, just to maintain consistency with the other West German vehicles

One of these models – to be used as a command vehicle - is from the new 15mm Leopard 1 box offered by the fine folks at Plastic Soldier Company.  There was a hiccup with the initial release of these models as the first wave of kits did not include a hatch for the driver (oops!). But they sorted all of that out in short order, and I can readily recommend you purchase them if this tank is something that interests you!

The other three are mixed resin and metal kits from Battlefront.  I’m pleased to say the quality here was very good.

While the Leopard 1 was no longer on the Bundeswehr frontlines, it was still a very common tank among NATO allies, where it continued to serve in a frontline role, including Canada! This is something I hope to have more about in later Challenge submissions…

Two more modern-day "big cats" - Leopard 2s on the prowl for Warsaw Pact targets

A commander popped out of the hatch to help make it easier to find the command tank on the table

And finally here are two more of the Leopard 2s…Battlefront sells these in packs of five models, so I thought I would finish these to join the other three I had painted for last week. As before, these are very, very fine plastic models from Battlefront…my only quibble is the very vulnerable connection for the cupola MG…hopefully they will last for a while…

Ready for gaming action in "Team Yankee"!

So that submission was another 10 vehicles in 15mm, which should hopefully net me
another 60 points toward my goal. 

I also completed a submission to the "flight" bonus round - recurring bi-weekly features of Curt's Analogue Hobbies Painting Challenge.  While my submission was not even close to being as cool as Byron's (which won the most votes - rightfully bloody so!), it's still helpful in terms of chipping away at the unpainted lead! It was a quad 20mm AA gun and crew from Battlefront.

Quad 20mm gun and crew in 15mm - models by Battlefront

Useful against the Red Air Force, or, increasingly as things got desperate in the East, against the Red Army as well...

This little crew will have some fun in WW2 games at some point soon, when the WW2 bug bites again...

That's it for now from the AHPC.  Stay tuned for more!