Painting Challenge Submission 17 - Orc Characters and Support for Warmaster

Some supporting bits for my 10mm Warmaster Orcs - metal figures from GW.

This is yet another of my concluding submissions to AHPC XII. As the end of the Challenge approached, I thought I would round out my Warmaster Orcs a bit more. That project was a major focus for me during this edition of the Challenge, and it seemed right to make the initial force more complete. Here we have an assortment of Orc characters and commanders, as well as a good old rock lobber - fun awaits! These are all metal castings from GW's long-lost "Warmaster" figure range.

Here's a serious Orc Lord!

One of the (many) things the "Warmaster" rules get so perfectly right is the use of characters. I know one common detraction for the "Warhammer Fantasy Battle" game was the way overpowered characters can take over the game. "Warmaster" is much better - the characters are essential, of course, but indirect. They cannot succeed on their own, they have to work through the units they command. They can enhance them, yes, and have a notable impact, but in doing so they are also creating risk. 

The Wyvern is tricky to assemble (and needed a pin for the base), but what an awesome figure, I just loved it.

Tried to get a leathery look for the wings on this monster.

Even the characters riding terrifying creatures, like this Orc Warlord on a Wyvern, are therefore very influential, and powerful, but also at much more risk than the equivalent in a standard Fantasy Battle game. This figure is a favourite, something I have wanted to paint ever since I saw it in a GW catalogue so long ago. It has been sitting in a blister pack in my horde for something like ten years? How fun to get some paint on this beast at last!

Let's go ladz!

Suitably angry and armed boyz for the chariot.

Nasty war boars ready to charge home!

We also have an Orc hero riding a war chariot of some sort - will be a useful commander to use when the big guy on the Wyvern is not around. That chariot looks like a totally safe ride, I'm sure everyone on board will be fine, right? 

A weedy little gobbo shaman...

Orc Shaman with handy skull supply!

"Warmaster" also totally gets the magic aspect of fantasy wargaming correct - the magic is important, but won't win anything on its own. Still, the Orcs can now get in on the spell-casting with two of the heroes here - one is an Orc Shaman (with a handy skull-shaped altar, just for Barks!) and the other is a Goblin Shaman, with a couple of squigs on hand because obviously...squigs, right?

"Put yer back inno it!"

Finally, we have a rock lobber and crew. The Orcs don't really have much in the way of missile-armed troops in their army. Given their preference for brute force, that makes sense, but going up against all of those cannons and crossbows in the Empire, they could use a little bit of artillery, and this rock lobber fits the bill. 

Troll-powered trebuchet. I'm sure things will be OK with this, right?

You get more crew figures than can actually fit on the game-sized base, so I put the "commander" for the lobber on a seperate base, leaving the poor troll and two gobbos on the same base as the lobber. Looking at the contraption, I can see the orc wanting to keep a bit of distance, in case things go wrong...

Thanks for reading - there was one more submission before things concluded in AHPC XII, and I will post that shortly, but in the interim, happy brushing everyone!

Challenge Submission #18 - Another Mixed Bag of WW2 Vehicles

 

Last November fellow Conscript Dallas and I were discussing the idea of a France 1940 scenario for Bolt Action. We had played 'The Battle of Stonne' scenario from the Bolt Action campaign book 'Germany Strikes' in October 2021, and were looking at another chance to pit French and German armour against each other. We settled on 'The Battle of Orp' where the 3rd Panzer Division met the 3^e DLM (3rd Light Mechanized Division). A few of the vehicles needed were not in either of our collections, plus I had been looking at ordering some German and Soviet trucks to transport troops on the battlefield, as well as some more early Soviet armour. In the end  I ordered 3 GAZ AAA trucks, 3 T-26 tanks, 3 Krupp Protze trucks, 2 Panzer III Ausf E tanks, and a Hotchkiss H39 tank from Rubicon Models. They arrived just before last Christmas.

 

A group shot of all twelve vehicles

A size comparison of three tanks in the same scale

The GAZ-AAA was a truck produced at the Gorkovsky Avtomobilny Zavod (Gorky Automobile Plant) from 1936 to 1943 as the company's first 6-wheeled vehicle. During that time, over 37,000 trucks of various patterns were built. The Rubicon kits were easy to assemble, and  could be completed with or without a driver in the cab. (I went with the driver option.) It comes with a one-piece tarp that can be snapped into place, so I can field them with the tarp on or off. They will provide some necessary transport for all my Soviet infantry.

 

GAZ-AAA truck with tarps

GAZ-AAA truck without tarps

 

The T-26 tank kit comes with all the necessary parts to build one of ten different variants of the tank, which was based on Vickers E Six Ton. The T-26 entered active service for the Red Army in 1932, and it was used in many conflicts of the 1930s as well as during the Second World War. When production ceased in 1941, over 10,000 tanks of all variants had been produced. Of all the options available, I went with the M1933 turret, and assembled one with a radio aerial along with a commander that came with the Warlord Games BT-7 tanks I had painted in January. 

 

The German Krupp Protze was a truck used by the Wehrmacht to transport troops and tow the 37mm anti-tank gun. While I have a number of German 251/1 half-tracks, the reality is that most Panzergrenadiers rode in trucks. Using Bolt Action rules, the cost of a truck is less than half the cost of a half-track. The Rubicon kits can be built as the troop transport variant, with the tarp either up or down, or to tow the PAK. I built all of mine as transports, so I may end up ordering another as a towing vehicle.

 

The German Panzer III Ausf. E was an early model of that tank armed with a 37mm gun in the turret. It saw service in Poland and France before being replaced by upgraded versions. The Rubicon kits supply enough parts to build one of the E, F, or G variants of the tank. I added a commander that came with the Bolt Action Panzer I tanks I built in December as I liked it better than the one that came with the models. I painted up my Panzer IIIs as part of the 3rd Panzer Division with the Berlin bear symbol on the side of the turret.

 

 The French Hotchkiss H39 was an improved version of the H35. Some models were further upgraded to a longer-barrelled SA38 37mm anti-tank gun. The Rubicon kit is a resin model with enough extra parts to build the French tank with either the SA38 or the earlier Puteaux SA18 low velocity gun, as well as a different cupola if you want to build a version of the tank in German service. 

 

 

Thanks for reading. We are planning on playing the 'Battle of Orp' scenario soon, so stay tuned for the After Action Report.
 

Painting Challenge Submission 16 - Plastic Death Korps of Kreig

A squad of "Death Korps of Krieg" troops - plastic from GW.

Continuing with my wrap-up/catch-up posts of final AHPC submissions, we have a selection of cheerful fellows to represent a squad of troopers from the "Death Korps of Krieg", a military unit set in Games Workshop's "Warhammer 40k" universe. With a name like that, you know they MUST be happy chaps, right? These are multi-part plastic 28mm figures from GW.

The "Death Korps" have a specific story in the lore of the 40k setting, but it's a bit TL/DR. Suffice to say the setting offered the sculptors at Forge World, (the sort-of-associated-but-not-totally-coordinated-but-still-wholly-owned-or-something GW studio) a chance to explore a particular design theme for the "Imperial Army" troops - that theme is "World War I, but, you know, in the year 40,000". This sort of look had been attempted by others, but the Forge World sculptors at the time hit it out of the park with the "Death Korps of Krieg" - a full range of figures blending the kit, look and despair of troops on the western front in 1916 with certain 40k flourishes (skullz!).

Lots of detail on the kit.

Can you spot the small skullz?

The Krieg sculpts from Forge World were amazing. They were - and still are - a stark contrast to the plastic offerings of the day (either the deeply uninspiring Cadians, or, much worse, the complete-crap Catachans). As nice as they were, however, they were only available from Forge World, and so were seldom seen on gaming tables.

Communications trooper.

Love the flare pistol.

Another comms trooper...not sure what I was thinking by doing two of them...oh well...

Really like this pose.

Fast forward to summer 2021, and the release of a new edition of the "Kill Team" rules from GW. The new box set had guardsmen from the "Death Korps of Krieg" - and they were plastic! I picked up a set, and wow, I think this might be the start of something...the figures are so cool, with lots of options for assembly.  I built this unit mostly to represent a basic infantry squad (one sergeant, one special-weapon trooper), but I did mix in a couple of specialists with comms equipment for use with "Kill Team".

The grenadier is fantastic, loading another round...

Suitably action-ish pose for the officer.

It would make sense for GW to add a couple of more plastic sets for the Krieg troopers - all they need are heavy weapon crews, and some officer sets. That said, GW's moves often don't...make much sense? We'll see. But I certainly am going to track down a few more boxes of these fellows, it will be a fun new-project for the future!

A couple of the regular chaps aiming their laser rifles.

I loved working on these figures. It will take a bit of time, but watch for more to appear in this space, as I don't think I will be satisfied with just one squad...thanks for reading!

Challenge Submission #17 - A Horde of Shambling Zombies

 

This is the first of two large batches of zombies that I did for the Painting Challenge. I am starting with two boxes of plastic Wargames Factory Zombies that I picked up at a local hobby store at least a decade ago. They have languished in the 'big box of unpainted minis' until now. These seem to have gone out of production in the interim.

Each box contained five identical sprues with enough parts to build 30 figures. Every sprue provided one figure in a lab coat, four different pairs of legs, four upper torsos, and a variety of heads. All the left arms were part of the upper torso, but the right arms were separate. This allows for some mix and match, although some combinations work better than others. I will let the pictures tell the rest.

The figures were assembled and then glued onto 1 inch fender washers. I wanted to leave the bases quite plain to look like concrete, so I used some spackling paste to create a smooth transition from the molded base to the washer. Once everything was dry and sanded, the figures were primed grey from a rattle can. They were then painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. Here is the end result.

 

The Horde, out for an evening shamble

 

 

It has been quite a while since the Conscripts had a Zombie game, and I am looking for a chance to get these minis on the table top. Stay tuned for some upcoming Zombie mayhem.

Challenge Submission #16 - Soviet Infantry in Winter Uniforms

 

 

Here is another contingent of defenders of Mother Russia that was completed for the Painting Challenge, specifically 42 Soviet Winter Infantry from the Warlord Games boxed set of the same name. The set consists of five identical sprues of eight figures, plus three weapons sprues, enough to build 40 miniatures. I transferred two additional figures from the Siberian Veterans I did last week to beef up the numbers a bit. They are dressed in either greatcoats or quilted jackets, many wearing mitts, or having them dangle from 'idiot strings'. The selection of heads provided a lot of choice from a variety of fur hats, pilotkas, or helmets, with many of the faces wrapped in scarves. The only criticism I have with the set is that the weapons sprues don't provide enough basic Moisin-Nagant rifles. but I was able to make up the shortfall by carving away telescopic sights, or grabbing rifles from the sprues that came with the box of Siberian Veterans.

These were all painted in my usual style, starting with a dark brown primer. All the basic colours were painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. At times it was a little tricky getting the brush into the deep recesses. I might try a method I saw on YouTube where all the parts were painted while still on the sprue and then assembled. I used AK Diorama products 'Snow' and 'Snow Sprinkles' on the bases to give them that frosty look. The dead grass is Vallejo Scenery 'Wild Tuft - Beige'. The end result is a platoon of three identical 10 man sections, each with a submachine gun, a mix of Moisin-Nagant rifles and carbines,  a DP-28 light machine gun team, plus some hand grenades and Molotov cocktails, and a section of 9 conscripts armed with rifles, all led by a senior officer with a pistol. Add to that a PTRS-41 or Simonov anti-tank rifle team, ready to engage the Fascist invaders. 

The Bolt Action rules for Soviets allow a free section of conscripts as one of the force selection options, or I can use them to increase the strength of the other three sections up to 12 men, so this group will provide me with some options on the wargames table of either bigger sections, or a free group of 'Grot'. They will be teamed up with my Soviet Winter Support Group and my whitewashed T-34 for a battle in the snows of Russia.

 

A platoon of Soviet infantry in Winter uniforms

Veteran Officer and Anti-tank Rifle Team

Squad No. 1

Squad No.2

Squad No.3

Призывники Фосетт-авеню

 This was the last of my Soviet infantry. The last of the Soviets? Stay tuned for the next submission.