Challenge Submission #20 - The Final Stop of the Challenge Quadrant

 

My last submission for the Analogue Hobbies Painting Challenge XII was a gathering of Lord of the Rings figures, both Good and Evil. Some of these had been in the painting queue for several years, while others were recent purchases to add to the collection. All were painted in my usual style, starting with a coat of black primer, followed by Vallejo acrylics, and then a mix of ink washes and/or highlights until I got the look I wanted. May they be deemed worthy of the Final Challenge.

The first group is a trio of Orc Trackers that have been in the 'PENDING' box for a number of years. These appear in the Barad-dûr section of the latest version of the Armies of Middle Earth manual, but now seem to be out of production. In addition to their role as trackers, they will also be useful to depict dismounted Warg riders.

 

 

Next up are the three Orc Captains, Gorbag, Grishnákh, and Shagrat (holding Frodo's mithril shirt). Like the Orc Trackers, they have also been in the 'PENDING' box for a while. These appear in the army lists in the Mordor section.

 

Gorbag, Grishnákh, and Shagrat

Shagrat, Grishnákh, and Gorbag

The last of the Evil characters is an Orc Shaman, who also appears in the Barad-dûr section of the latest version of the Middle Earth army lists. He looks pretty badass with his collection of skulls. This is another metal figure that I have had for a while. A plastic version of the figure is available from Games Workshop as a boxed set which includes one mounted on a Warg.

 

The first group for the Good side are three leaders of the Ithilien Rangers - Faramir, Captain of Gondor, Madril, Captain of Ithilien, and Damrod, Ranger of Ithilien. These are a very recent purchase and came as a blister containing all three figures. They will be ready to command the company of Rangers that I painted last April.

 

Faramir, Madril, and Damrod

Damrod, Madril, and Faramir

 The last offering is Éowyn (as Dernhelm) and Meriadoc, Squire of Rohan. While I had already painted metal miniatures of Éowyn, I was so impressed by the newer plastic set of figures that another participant had submitted for the Challenge, I just had to buy a box for myself. I especially liked the way Merry can be placed in front of Éowyn, or removed as the scenario requires. Not having any contrast paints in my arsenal, I used my usual technique of starting with a black primer, followed by Vallejo acrylics, with highlights and washes as needed to get the final result. Since the metal miniatures I had depicted Éowyn without a helmet, I went with the 'helmet on' version with the plastic set.

 

Éowyn with Merry

Éowyn with Merry

Éowyn without Merry

Éowyn without Merry

Éowyn and Merry on foot

Merry and Éowyn on foot

New plastic and old metal mounted Éowyn

Old metal and new plastic Éowyn on foot

 

This concluded my first year of participation in the Analogue Hobbies Painting Challenge. Congratulations to all my fellow Conscripts who took part. I am looking for next year's challenge, but more importantly, gaming with all our collective newly painted minis. Thanks for reading.

Challenge Submission #19 - Yet Another Shambling Horde of Zombies

This was my last batch of zombies done for the Painting Challenge. It is a mix of 36 Wargames Factory Zombie Vixens, and 24 Zombicide Box of Zombies Set 1 Walk of the Dead. 

Horde #2 out for a shamble

The Zombie Vixens come as 3 identical sprues of 12 figures of which 10 are standing, one is missing its lower legs, and the last is missing everything below the diaphragm. All the figures have separate heads and some choice of arms, so it is possible to do a fair bit of 'mix and match', although some combinations fit together better than others. The bases also come as a separate piece, but only enough for the standing figures. I had a half dozen wooden discs of the right diameter in the bits box to put the half figures on, so it all worked out in the end. The figures are finely sculpted with a variety of open wounds, with some showing exposed bones and/or skulls, all looking appropriately gruesome.

The Zombicide set consists of three figures each of eight different poses which are described as 'walkers', 'runners', or 'fatties'. They come as one piece, including the base, so no assembly required. The latter two types will add some variety to the usual slow moving undead, being faster or tougher respectively.

Once the Zombie Vixens were assembled both sets were primed flat grey using a rattle can, and then painted with Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. I deliberately left the bases plain so they would look like concrete, rather than adding sand or flocking. As with my earlier Challenge submissions, the Quickshade leaves everything rather glossy, so I will hit these with some clear matt spray once it is warm enough to do it outside.

 

I am looking forward to getting these on the table with the Conscripts house rules for Zombies (with a bit of tweaking to accommodate the 'runners' and 'fatties'). Thanks for reading.

Challenge Submission #18 - Another Mixed Bag of WW2 Vehicles

 

Last November fellow Conscript Dallas and I were discussing the idea of a France 1940 scenario for Bolt Action. We had played 'The Battle of Stonne' scenario from the Bolt Action campaign book 'Germany Strikes' in October 2021, and were looking at another chance to pit French and German armour against each other. We settled on 'The Battle of Orp' where the 3rd Panzer Division met the 3^e DLM (3rd Light Mechanized Division). A few of the vehicles needed were not in either of our collections, plus I had been looking at ordering some German and Soviet trucks to transport troops on the battlefield, as well as some more early Soviet armour. In the end  I ordered 3 GAZ AAA trucks, 3 T-26 tanks, 3 Krupp Protze trucks, 2 Panzer III Ausf E tanks, and a Hotchkiss H39 tank from Rubicon Models. They arrived just before last Christmas.

 

A group shot of all twelve vehicles

A size comparison of three tanks in the same scale

The GAZ-AAA was a truck produced at the Gorkovsky Avtomobilny Zavod (Gorky Automobile Plant) from 1936 to 1943 as the company's first 6-wheeled vehicle. During that time, over 37,000 trucks of various patterns were built. The Rubicon kits were easy to assemble, and  could be completed with or without a driver in the cab. (I went with the driver option.) It comes with a one-piece tarp that can be snapped into place, so I can field them with the tarp on or off. They will provide some necessary transport for all my Soviet infantry.

 

GAZ-AAA truck with tarps

GAZ-AAA truck without tarps

 

The T-26 tank kit comes with all the necessary parts to build one of ten different variants of the tank, which was based on Vickers E Six Ton. The T-26 entered active service for the Red Army in 1932, and it was used in many conflicts of the 1930s as well as during the Second World War. When production ceased in 1941, over 10,000 tanks of all variants had been produced. Of all the options available, I went with the M1933 turret, and assembled one with a radio aerial along with a commander that came with the Warlord Games BT-7 tanks I had painted in January. 

 

The German Krupp Protze was a truck used by the Wehrmacht to transport troops and tow the 37mm anti-tank gun. While I have a number of German 251/1 half-tracks, the reality is that most Panzergrenadiers rode in trucks. Using Bolt Action rules, the cost of a truck is less than half the cost of a half-track. The Rubicon kits can be built as the troop transport variant, with the tarp either up or down, or to tow the PAK. I built all of mine as transports, so I may end up ordering another as a towing vehicle.

 

The German Panzer III Ausf. E was an early model of that tank armed with a 37mm gun in the turret. It saw service in Poland and France before being replaced by upgraded versions. The Rubicon kits supply enough parts to build one of the E, F, or G variants of the tank. I added a commander that came with the Bolt Action Panzer I tanks I built in December as I liked it better than the one that came with the models. I painted up my Panzer IIIs as part of the 3rd Panzer Division with the Berlin bear symbol on the side of the turret.

 

 The French Hotchkiss H39 was an improved version of the H35. Some models were further upgraded to a longer-barrelled SA38 37mm anti-tank gun. The Rubicon kit is a resin model with enough extra parts to build the French tank with either the SA38 or the earlier Puteaux SA18 low velocity gun, as well as a different cupola if you want to build a version of the tank in German service. 

 

 

Thanks for reading. We are planning on playing the 'Battle of Orp' scenario soon, so stay tuned for the After Action Report.
 

Challenge Submission #17 - A Horde of Shambling Zombies

 

This is the first of two large batches of zombies that I did for the Painting Challenge. I am starting with two boxes of plastic Wargames Factory Zombies that I picked up at a local hobby store at least a decade ago. They have languished in the 'big box of unpainted minis' until now. These seem to have gone out of production in the interim.

Each box contained five identical sprues with enough parts to build 30 figures. Every sprue provided one figure in a lab coat, four different pairs of legs, four upper torsos, and a variety of heads. All the left arms were part of the upper torso, but the right arms were separate. This allows for some mix and match, although some combinations work better than others. I will let the pictures tell the rest.

The figures were assembled and then glued onto 1 inch fender washers. I wanted to leave the bases quite plain to look like concrete, so I used some spackling paste to create a smooth transition from the molded base to the washer. Once everything was dry and sanded, the figures were primed grey from a rattle can. They were then painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. Here is the end result.

 

The Horde, out for an evening shamble

 

 

It has been quite a while since the Conscripts had a Zombie game, and I am looking for a chance to get these minis on the table top. Stay tuned for some upcoming Zombie mayhem.

Challenge Submission #16 - Soviet Infantry in Winter Uniforms

 

 

Here is another contingent of defenders of Mother Russia that was completed for the Painting Challenge, specifically 42 Soviet Winter Infantry from the Warlord Games boxed set of the same name. The set consists of five identical sprues of eight figures, plus three weapons sprues, enough to build 40 miniatures. I transferred two additional figures from the Siberian Veterans I did last week to beef up the numbers a bit. They are dressed in either greatcoats or quilted jackets, many wearing mitts, or having them dangle from 'idiot strings'. The selection of heads provided a lot of choice from a variety of fur hats, pilotkas, or helmets, with many of the faces wrapped in scarves. The only criticism I have with the set is that the weapons sprues don't provide enough basic Moisin-Nagant rifles. but I was able to make up the shortfall by carving away telescopic sights, or grabbing rifles from the sprues that came with the box of Siberian Veterans.

These were all painted in my usual style, starting with a dark brown primer. All the basic colours were painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. At times it was a little tricky getting the brush into the deep recesses. I might try a method I saw on YouTube where all the parts were painted while still on the sprue and then assembled. I used AK Diorama products 'Snow' and 'Snow Sprinkles' on the bases to give them that frosty look. The dead grass is Vallejo Scenery 'Wild Tuft - Beige'. The end result is a platoon of three identical 10 man sections, each with a submachine gun, a mix of Moisin-Nagant rifles and carbines,  a DP-28 light machine gun team, plus some hand grenades and Molotov cocktails, and a section of 9 conscripts armed with rifles, all led by a senior officer with a pistol. Add to that a PTRS-41 or Simonov anti-tank rifle team, ready to engage the Fascist invaders. 

The Bolt Action rules for Soviets allow a free section of conscripts as one of the force selection options, or I can use them to increase the strength of the other three sections up to 12 men, so this group will provide me with some options on the wargames table of either bigger sections, or a free group of 'Grot'. They will be teamed up with my Soviet Winter Support Group and my whitewashed T-34 for a battle in the snows of Russia.

 

A platoon of Soviet infantry in Winter uniforms

Veteran Officer and Anti-tank Rifle Team

Squad No. 1

Squad No.2

Squad No.3

Призывники Фосетт-авеню

 This was the last of my Soviet infantry. The last of the Soviets? Stay tuned for the next submission.